Y2K guys, I need a measurement. Please.
#1
Y2K guys, I need a measurement. Please.
I'm getting close to flyin to the east coast to see the boat in person. Before I waste my money on a ticket I was wondering if someone could measure the cabin headroom to see if I can sit up in it.
What's the distance from the bench base to the top of the cabin. If it's sloped could I have say, three from front to rear?
Thanks Tom
What's the distance from the bench base to the top of the cabin. If it's sloped could I have say, three from front to rear?
Thanks Tom
#2
Re: Y2K guys, I need a measurement. Please.
I called John. He said well thiers probably three feet or so and he has no problem siting up on the two bench seats without hitting his head. I hav'nt met him but I know he's not 6' plus as I am. If someone could measure for me tonight I would much appreciate it.
#3
Registered
Join Date: Jan 2004
Location: "SUPERBOATLAND" LONG ISLAND - NEW YORK
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y2K guys, I need a measurement. Please.
FASTERDAMMIT
Hopefully JCAP or Fastedy will reply.
-I am going to SB factory in the a.m. If KRAKEMEUPS Y2K is measureable, I or FX10 (Rick) will hook you up.
-JC is 5' + or -
Hopefully JCAP or Fastedy will reply.
-I am going to SB factory in the a.m. If KRAKEMEUPS Y2K is measureable, I or FX10 (Rick) will hook you up.
-JC is 5' + or -
#4
Registered
Re: Y2K guys, I need a measurement. Please.
Still havent gotten the deck on Krackmeup. So I can't give ya a measurement. Ed, could you help him out. I'm 6'2", and I sit up in the cabin. The benches are also 6'6" long. Johns going to be rigging Kracks deck tomorrow, then we put the deck on. Can't get a measurement till then.
Rick
Rick
#8
Registered
Join Date: Jan 2004
Location: "SUPERBOATLAND" LONG ISLAND - NEW YORK
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y2K guys, I need a measurement. Please.
FASTERRR
I was at the factory yesterday. Didn't forget you too many bits & pieces for me to measure in state of Kraks boat. Guess you really could take a few measurements & add 'em up, but WTF? My 24 starts with a max of 32" (top of seat cushion to headliner & goes down to 26"). She is tight. Hope the 30's is higher for you.
***The things I do for SB.....
I was at the factory yesterday. Didn't forget you too many bits & pieces for me to measure in state of Kraks boat. Guess you really could take a few measurements & add 'em up, but WTF? My 24 starts with a max of 32" (top of seat cushion to headliner & goes down to 26"). She is tight. Hope the 30's is higher for you.
***The things I do for SB.....