Offshoreonly.com - Superbabi !! Heres your pics of your Y2K

The konrad was designed to be used w/a tranny.
So you'd have to get the ACE package, which is basically an extension box w/ steering to house the trans.

[url]

This used one is complete

Superbabi

03-06-2009 02:54 PM

Quote:

Originally Posted by pi75 (Post 2815680)

That was MDG I think

Yes thats Dave (MDG). So there will be 2 Y2K'S with the Konrad. I think the Konrad is a great choice, when being rigged for the first time at the factory. Not sure what drive i'm going with, but i want it to bolt up to the Merc. Gimble Housing.

z.zuperboat

03-09-2009 05:23 PM

MDG,s boat would be a great test. Quick toooooo. I bet it goes faster and handles better. I bet konrad is looking for test boats to push their product !!

MDGperformance

03-09-2009 07:34 PM

The Konrad 560 was designed more for cruiser applications like the bravo 3,dual props would work great on the y2k to keep the boat very neutral,the problem is prop technology for dual props limits the speeds,mercury did have some props for the blackhawk drives that worked good but not sure if they are still available,when volvo had there hp motors they use to use dual props but there top end speeds were down,if they would have worked on prop technology who knows,they pulled the plug on the hp stuff,will have to call Konrad and see what they think on trying one on my y2k

Superbabi

04-08-2009 02:58 PM

Ron Potter 800 back in boat, a refreshed XR, and a couple of changes !!!! ALL set to go !!!

HuntingtonBeach

04-08-2009 04:16 PM

Quote:

Originally Posted by Superbabi (Post 2815552)

Mike, the Konrad/800 Y2K is still at Superboat Rigging shop. I believe thats Robs boat. Is the Konrad a direct bolt on replacement for the XR ???

It's more like 950ish but whos counting...

HuntingtonBeach

04-08-2009 04:17 PM

Gary you around the 22nd? I'm flying in if you want to get together for lunch?