Re: Merc. 600 Hp/sci
 

Out plowing the lot at work today...AGAIN...Ive had enough, and what ever you do dont look at the forcast around here for this weekend

Re: Merc. 600 Hp/sci
 

Keith, Just Keep Rubbing It In About That Texas Weather.......ha Ha Lol.........hey Guys If This Keeps Up ( Cold & Snow ) Superbabi May Hit The Water By June :( :( :(

Re: Merc. 600 Hp/sci
 

If you go sportmasters talk to the factory or dealer to see if they will polish them. I asked the Cig guy what it took. He says he can do 2 drives in 4 hours.

The only time I have seen someone lose speed with sportmasters is when they retrofit a bravo and can't get the X dimension right. Cig is putting them on all their new 525s and 600s. They aren't doing that because they are slower.

There were tons of boats at Miami with ITS. I think most folks like the way it cleans up the back of the transom with the integrated steering. I sure like it, especially in a staggered implementation. :D :D

Re: Merc. 600 Hp/sci
 

Krak, It was 89 deg here today!! :D

Re: Merc. 600 Hp/sci
 

OK TO LATE FOR MERC. ITS. TRANSOM WOULD HAVE TO BE RE GLASSED..........NOT GOING TO HAPPEN. HOWEVER WE CAN USE WHAT TOM IS USING. THE 12" STELLING SET BACK WITH THE HD EXTERNAL STEERING I HAVE ALREADY. ALL IT TAKES IS $$$$$$$$$$. LETS SEE ????? :evilb: :evilb: :evilb:

Re: Merc. 600 Hp/sci
 

Faster, 89!? You need to go boating!

Re: Merc. 600 Hp/sci
 

Uh, Helloooo!!!

Re: Merc. 600 Hp/sci
 

I JUST FOUND A POCKET FULL OF CHANGE !!!!!! THERE JUST MAY BE A 12" STELLING SET BACK FOR SUPERBABI !!!! LET ME COUNT THE CHANGE, I WILL GET BACK TO YOU.... :evilb: :evilb: :evilb:

Re: Merc. 600 Hp/sci
 

Oh Hell Gary,
How about a 1200HP Sterling and a dry sump VI drive.
You need Spring to come before you don't have any more $$ to put gas in Babi... :eek:

Re: Merc. 600 Hp/sci
 

Go with the stellings and then you can put my dyno unit on it and see exactally how much HP and TQ those 600sci motors are really putting out. With the stellings you can use the IMCO steering ears on the side and rams and route the steering hoses into the side of the box for a 'clean' install.