Boat Cover
#2
Registered
Joined: Aug 2006
Posts: 4,200
Likes: 1
From: Simsbury ct
george I ran into a guy down innOS who is right where I keep my boat. His prices seemed pretty reasonable to me.
You may want to give him a try.
The canvas group I think was the name. Ill dig out his card if you cant find one someone has in the basement.
I know people keep wierd stuff, we have some 30 sutphen stuff like that kicking around so you never know whos got what.
You may want to give him a try.
The canvas group I think was the name. Ill dig out his card if you cant find one someone has in the basement.
I know people keep wierd stuff, we have some 30 sutphen stuff like that kicking around so you never know whos got what.
#5
Thread Starter
Registered

Joined: May 2010
Posts: 272
Likes: 2
From: Rehoboth, Ma.
Jeff, As soon as I get a trailer for it, I'll get it outside and get you
some photos. After 5 months, I finally got the Maine registration
last week...other than that, she's pretty much ready to fire up!
Let's keep our fingers crossed that all goes well. I'm excited!
George
some photos. After 5 months, I finally got the Maine registration
last week...other than that, she's pretty much ready to fire up!
Let's keep our fingers crossed that all goes well. I'm excited!
George
#7
Registered
Joined: Aug 2006
Posts: 4,200
Likes: 1
From: Simsbury ct
No its an older, (NEW) cover I had, It doesnt fit well and is about to be taken to The canvas group for some alterations.
I may have another OB motor cover made at the same time that covers the OBs and snaps into that full lenth cover as well. that would protect the hydraulic bracket at the same time.
BTW George that is the name the canvas group. seems like a really nice guy.
I may have another OB motor cover made at the same time that covers the OBs and snaps into that full lenth cover as well. that would protect the hydraulic bracket at the same time.
BTW George that is the name the canvas group. seems like a really nice guy.
#8
Registered
Joined: Aug 2006
Posts: 4,200
Likes: 1
From: Simsbury ct
Jeff, As soon as I get a trailer for it, I'll get it outside and get you
some photos. After 5 months, I finally got the Maine registration
last week...other than that, she's pretty much ready to fire up!
Let's keep our fingers crossed that all goes well. I'm excited!
George
some photos. After 5 months, I finally got the Maine registration
last week...other than that, she's pretty much ready to fire up!
Let's keep our fingers crossed that all goes well. I'm excited!
George
did you get both props with it?
#9
Thread Starter
Registered

Joined: May 2010
Posts: 272
Likes: 2
From: Rehoboth, Ma.
Thanks for the info on the Canvas Group Jeff. And yes I did get
the other prop from Brian. I'm going to give it a go with the one
that's on right now...then later on I'll try the new one. I'm going
to try running without the mufflers but I have a funny feeling that
the "lakers" won't be too happy. We'll see what happens!
the other prop from Brian. I'm going to give it a go with the one
that's on right now...then later on I'll try the new one. I'm going
to try running without the mufflers but I have a funny feeling that
the "lakers" won't be too happy. We'll see what happens!
#10
Registered
Joined: Aug 2006
Posts: 4,200
Likes: 1
From: Simsbury ct
It was pretty loud with the 4 inch and no mufflers!
The prop thats on it is too small, will run 55 or so that way but you need to pull the trottle back a ways to keep from over reving so It needs more pitch. I cant remember what they were but I would say it was 1000 RPM too much.
It would basically rev to the sky if you let it.
The prop thats on it is too small, will run 55 or so that way but you need to pull the trottle back a ways to keep from over reving so It needs more pitch. I cant remember what they were but I would say it was 1000 RPM too much.
It would basically rev to the sky if you let it.


