|
2 Attachment(s)
Thoughts on scoop? Just a mock up right now but thinking about glassing it on the hatch. Gives me an extra 7" in case I can ever afford a blower.
|
1 Attachment(s)
[ATTACH=CONFIG]533180[/ATTACH]First coat of gel....
|
Nice!
|
Why do you have the tabs going straight back instead of with the angle of the hull ? i have never seen that before ??
|
Originally Posted by wstultz
(Post 4190313)
Thoughts on scoop? Just a mock up right now but thinking about glassing it on the hatch. Gives me an extra 7" in case I can ever afford a blower.
|
2 Attachment(s)
[ATTACH=CONFIG]535675[/ATTACH][ATTACH=CONFIG]535676[/ATTACH]A little progress. Slow but steady. By mounting the tabs that way I am hoping that they will help stabilize the boat at higher speeds. They are flat so that they give less input or slower input at high speeds. We will see if it works. Just trial and error at this point
|
If it doesn't work the way I hope I will just take them off and put them on the old fashioned way. I've seen several race boats rigged this way, mostly single engines, and some fountains and OLs have tabs flat as well.
|
Originally Posted by wstultz
(Post 4249796)
If it doesn't work the way I hope I will just take them off and put them on the old fashioned way. I've seen several race boats rigged this way, mostly single engines, and some fountains and OLs have tabs flat as well.
|
Yep, 380s. Turn this 26 into a 28. Lol
|
Need an update here!!!
|
| All times are GMT -5. The time now is 02:57 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.