All Sutphen owners - How many are out there (USA)
#1
Registered
VIP Member
Thread Starter
All Sutphen owners - How many are out there (USA)
Would be interesting if the folks that have a SUTPHEN BOAT (in the USA) would show a pic and list it here with some basic specs on the boat and size motors, speeds, approx area you live in. Really like this brand, and just would be nice to know how many are still running(or not). Besides, one of us might be looking to buy another Sutphen one day!!
Proud of the Sutphen family that built these boats because the overall design layout, toughness, handling, speed, quality.
Proud of the Sutphen family that built these boats because the overall design layout, toughness, handling, speed, quality.
Last edited by Cap'm Kurt; 02-06-2022 at 11:58 AM. Reason: revised info
The following 2 users liked this post by Cap'm Kurt:
242LS (02-28-2023), 315duramax (03-11-2022)
#2
Registered
VIP Member
Thread Starter
1999 32ft Sutphen Twin 502MpiMags
Stock except for Eddie Marine exhaust manifolds and risers, which gained 3mph. And added significant timing advance in upper rpms on the Mefi3. Gained another 3mph doing this.
76mph with 26p Bravo 4 blades. 79/80mph going to a 28P, same Bravo 4 blade.
Kurt
Louisiana
Last edited by Cap'm Kurt; 02-06-2022 at 03:57 AM. Reason: Add info
The following 6 users liked this post by Cap'm Kurt:
abones (02-07-2022), ben (02-06-2022), Boatsky (07-03-2022), hogie roll (04-09-2022), lucky strike (02-07-2022), rak rua (02-07-2022)
The following 4 users liked this post by Sutphen606:
#4
Registered
Im pretty sure there is a 26 Rum Runner with twin 200 Johnson outboards a couple miles from my house, but unfortunately has been sitting in the trees for at least the last 5 years I have been here. I have always wanted to stop and ask about it, just never have yet.
#6
Registered
1976 20 ' Super Pacer. Has a 521ci BBF making 650hp, Berkeley Jet. Totally restore with a few goodies from the modern 21s of today. Runs almost 70. Seen frequently back where it all stated on Lake Hopatcong, NJ
I'd post some pictures but I don't have enough posts to allow it.
I'd post some pictures but I don't have enough posts to allow it.
#8
Registered