Oil Cooler 2" x 15"
09-03-2008, 09:47 PM
#1
Oil Cooler 2" x 15"
1 1/4" slip on hose
Eddie Marine part # CS212-6-D
Retail price is $112.00 + shipping & handling
Take it for what its worth but it honestly has less than 1 hr. of time on it with a Fresh motor & New oil... I bought it b/c I thought I was having a condensation issue with a Larger 6" cooler that I had... It was then removed , sealed off & set on the shelf at my shop...
$65.00 buys it plus shipping
For any specific info Copy & paste the following into the search on Eddiemarine.com website
OIL COOLER-STD 2" WITH 1 1/4" SLIP
Eddie Marine part # CS212-6-D
Retail price is $112.00 + shipping & handling
Take it for what its worth but it honestly has less than 1 hr. of time on it with a Fresh motor & New oil... I bought it b/c I thought I was having a condensation issue with a Larger 6" cooler that I had... It was then removed , sealed off & set on the shelf at my shop...
$65.00 buys it plus shipping
For any specific info Copy & paste the following into the search on Eddiemarine.com website
OIL COOLER-STD 2" WITH 1 1/4" SLIP
09-04-2008, 12:02 PM
#3
To be honest I am unsure how much HP its rated for , If Im not mistaken it is called a medium duty cooler... I also have these other 2 forsale that can be used hooked togather as the pics show..
In my opinion they are in good shape.. There are a few really small places where the chrome has chipped a bit near the fittings , but like I said those are small areas..
Will seperate or sell as a pair..
$55.00 ea. w/o brackets
$85.00 ea. with brackets
$100.00 for both w/o brackets
$160.00 for both with brackets
All prices are plus shipping
In my opinion they are in good shape.. There are a few really small places where the chrome has chipped a bit near the fittings , but like I said those are small areas..
Will seperate or sell as a pair..
$55.00 ea. w/o brackets
$85.00 ea. with brackets
$100.00 for both w/o brackets
$160.00 for both with brackets
All prices are plus shipping
09-04-2008, 06:26 PM
#5
The chrome coolers are right at 15 1/2" each... In the pics. they are run in a series with the hose between them right at
4" which could be cut down a bit. However if you needed extra space they don't have to be ran like the picture, they can be placed side by side or just about anyway you could think of as space allows...
If you wanted both of the chrome ones with the brackets I would give you all the AN hoses & hardware connecting them.. Just let me know...
Thanks , Scott
4" which could be cut down a bit. However if you needed extra space they don't have to be ran like the picture, they can be placed side by side or just about anyway you could think of as space allows...
If you wanted both of the chrome ones with the brackets I would give you all the AN hoses & hardware connecting them.. Just let me know...
Thanks , Scott
09-04-2008, 10:13 PM
#6
Registered
Join Date: May 2007
Location: South Jersey
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Scott,
I would like to purchase the 2 chrome coolers if you still have them. Can you contact me if they are avaiable? Thank you
Jamie
[email protected]
I would like to purchase the 2 chrome coolers if you still have them. Can you contact me if they are avaiable? Thank you
Jamie
[email protected]
09-05-2008, 08:54 PM
#7
Scott,
I would like to purchase the 2 chrome coolers if you still have them. Can you contact me if they are avaiable? Thank you
Jamie
[email protected]
I would like to purchase the 2 chrome coolers if you still have them. Can you contact me if they are avaiable? Thank you
Jamie
[email protected]
09-18-2008, 12:02 AM
#10
I have had several inquiries but nodody has came through on this one yet....
So I Still have the one 2" x 15" Non-chrome 1 1/4" slip on hose oil cooler left... (pictures & part #'s above)
As previously stated it has less than an hour time on it with a fresh motor so it is still like new in every way !!
$65.00 takes it - Safely packaged up & Shipped to your door as long as you live in the lower 48...
Anybody ??
My p.m. box is usually full or near full so for my email address just add my screen name
( littledcsrodshop ) to ( @comcast.net )
Thanks , Scott
So I Still have the one 2" x 15" Non-chrome 1 1/4" slip on hose oil cooler left... (pictures & part #'s above)
As previously stated it has less than an hour time on it with a fresh motor so it is still like new in every way !!
$65.00 takes it - Safely packaged up & Shipped to your door as long as you live in the lower 48...
Anybody ??
My p.m. box is usually full or near full so for my email address just add my screen name
( littledcsrodshop ) to ( @comcast.net )
Thanks , Scott
Last edited by littledcsrodshop; 09-18-2008 at 12:05 AM.
