Again, apologize for no pics. Will have them Monday. If interested, leave email address. Thanks.

very interested.

need to know the mounting distance between center line driveshaft and the ram mounts. or, the distance between the transom assy and the ram mounts

thanks
Ned
206.919.4194
[email protected]

I do not have a template on paper that gives me that number. I'll check the rams to see if 8 or 9 inch rams. I know typically the ram is half way out on each side when drive is straight (center). This probably doesn't help you, but don't have a drive to "mach up" system. Marine Machine will certainly have info...see what I can find. I am guessing you might have an obstruction. For now, I can measure ram end to end (in and out position). This might give you some idea. I'll get back to you this evening on that number. Pics Monday.

Rams...(from end of hull mount to center of hole on clevis)ram in=22.75 inches; ram out=31.75 inches...9 inch rams. Don't have measurement off gimbal for hull mount yet though.

pic.

Offers? Gotta go!

Sold.