Propellers For Sale
 

I am cleaning house and have found a few gems!

All props are used, but in great shape.

Make me an offer!

Hydromotive H6 29P RH Labbed
Hydromotive H6 31P RH & LH Labbed

Hydromotive P5 31P RH & LH Labbed =SOLD
Hydromotive P5 32P RH & LH Labbed = SOLD
Hydromotive P5 29P LH Labbed (2 of them)
Hydromotive P5 27P LH Labbed

Hydromotive QIV 29P RH & LH labbed=SOLD
Hydromotive QIV 31P RH & LH labbed
Hydromotive QIV 30P LH Labbed

Mirage Plus 24P LH Labbed
Mirage Plus 23P LH stock

Bravo I 34P LH Kilo finished.
Bravo I 34P LH Labbed
Bravo I 30P RH & LH Stock =SOLD

Mercury #6 BRAND NEW 5B 16.50 x 28P RH & LH labbed props!

Julie

my offer would be for you to repurchase all of the old props that I have, then add them to your "cleaning house" sale so that i have a credit toward the next set of #6 props for the new boat. what'cha think?

i promise.... they're reeeeeally good props. i know the husband and wife team that built them! :drink: haha....

Joe

We'll talk! But feel free to anything you might want to sell on this thread, no worries.

Julie,,,,,will the RH #6 merc work on my Boat ???

And will u sep. them ? As u know i only need the RH .:party-smiley-004:

Scott

Shure you dont have 2 p5 27s r/l

Sorry guys just whats listed. Oh and I should mention that I cannot break up the pairs.

Julie

Can you twist one of those 29 P5x to a RH so you would have a pair and then take my 30 bravo's in on trade lol.

You know I would if I could! HA HA!!

Julie

24 pich
 

how much for the 24 pitch mirage?:party-smiley-004:

Make me an offer! I am really looking go get these props to new homes. Nothing sadder, than a labbed prop sitting on a shelf collecting dust bunnies!

Julie
727-531-2255

WHAT....I can't PM you Julie

30 Bravos, I need to ask about cost to alter those if I buy them......I could use a labbed (or just thinned leading edge) 31P set. Labbed 30's spun 5,500 in 95 degree flat water this summer and I'd like to bring that down just a tad. (these were borrowed props)

I am not sure why you can't PM me.....I check it out. Anyway if you need a 31P then you need to start with a set of 32P props. But you would be better off running a stock set of 30P props as labbing is very specific as the shop that performed the labbing and the hull they were labbed for.

Julie

Addition:

24P Mercury Choppers RH & LH rotations small hubs.

Julie

The Choppers are lab finished.

Julie

Choppers have Small shafts.

Julie

What does "kilo finished" mean?

Thinner than labbed....sometimes referred to as a double lab.

Julie

...it also usually means that they are only good for one or two "kilo runs" before they crack ----- that is, unless you're talking about Throttle-up propellers.... which, in my experience do not/ have not.

...less porous metal, just as thin = longevity.

Way to go guys (and girl!!!!! :eek: ).


Joe :ernaehrung004:

Man you are not kidding we have been commissioned for a set or more of those in the past!

This prop is not a potato chip..but certainly can be if someone wants it to be.

Joe how are the props running?

Julie

Well.... they're not potato chips, but I am certainily hooked ---- and couldn't stop myself from just having one even if I tried! LOL. I can't believe more people aren't running them yet.

The Skater is AMAZING! As usual with you guys, the CG is perfect and it flies great. We hit an oil tanker wake/swells just above 125 MPH. It flew perfectly and upon each re-entry it accellerated spot-on, getting the boat right where it needed to be for the next one. I believe we launched 5-6 times before we were thru them all. And at 125 MPH, that's a BUNCH of waves!

I love the "graduated" prop (not sure of exact terminology). Being 39's near the hub REALLY gives me awesome bottom end accelleration, with the graduation up to the 41 pitch as it nears the tip REALLY REALLY gets it to 150+ quick, whereas the standard 41 Hering that JT and I ran on the boat felt more like a paddle wheel with significantly less get-up-and-go. Not to mention they were already nicked up..... (thanks again Joey P. for letting me run your Herings!)


Joe

I run an old school Carrera 24 and am just getting into the sport. The old girl has a TRS backed up by a 420HP 502. She currently has an old 25P cleaver, anyone got any suggestions, on where I should start regarding a prop? Anyone got anything for sale... (I don't have deep pockets.)

I am sorry, but I don't have any small pitch props. I would think that you might do well in a 4B semi-cleaver.

Julie

I've had best speeds with a Maximus 5 blade labbed 34. But have thrown blades on 2 separate occassions. In one summer. I've been running 4 blade maximus 34's, banging the rev limiter a bit but not all over it...but obviously slower speeds.

I am interested in giving your props a shot and see how they perform. I suspect I'd want a p5x 34 labbed -but look to you to recommend.

What would you recommend?

AJ,

It sounds as if your propellers are suffering from the surfacing application. Asking them to do something that they were not intended to do (surface). I would recommend stock props if you want to stick with high rake, round ear props. Now if you are willing to work with spacers and semi-cleavers you may find something more beneficial than just blades staying whole and intact. But it would definately require some dial in work.

Julie

I would like to maximize top end but not suffer from cavitation out of the hole.

Would like to avoid spacers at this time.

What prop would you recommend?

If you can provide me with your performance data I can take a look.

I need:

Wot RPM
WOT MPH
Gear ratio
Engine and RPM at which peak HP is produced (if engine is modified)

Julie

[email protected]

Add On:

Stock 28P Hydro QIV RH, small shaft.

Julie

how much for the 28p rh labbed

The 28P Hydro QIV is stock, not labbed for $300

Julie - That 4 blade I got from you for my Center Console.... do I need a different thrust washer?? I have a Bravo I on it now with a replaceable hub ....

Not that I can run it anytime soon as mother nature seems to be pissed at me about something....

I would try it and see...if not call PT and they will have one if necessary.

Julie

Pt?

Power Tech 1-800-736-7767

Julie

Julie,s the only hottie that understands boat smack ,dont ya just love her HAPPY NEW YEAR GIRL

Thanks Crayolacrazy!

I am just Living the dream, baby!

Happy New Year.

Julie

I have found another Hydro to add to the list:

Hydromotive QIV 29P RH Stock with fat boy hub for XR or XZ drives.

Julie

What is the actual diameter of the 32 p5's?

They are a 15.25" diameter.

Julie

All the 4B 29P props are sold, thanks!

Julie

Found a 26P Stock LH Bravo I .

Julie