MEFI 3 and wiring harness
#1
Thread Starter
Registered
Joined: Jun 2006
Posts: 405
Likes: 1
From: Royal Oak, MI
I am replacing the complete MEFI 3 system off an Arizona Speed Marine HP500 clone with another fuel control computer and wiring.
I am selling a MEFI 3 controler and well labeled wiring harness. I did not run with this combination, but I'm guessing that since it is from AZM instead of Mercury, it probably has many of the crazy safeties programed out of it that so many people seem to have problems with.
But I know nothing else about this setup, as I did not run it personally, but it did come off a well running boat.
$395 for both
$275 for ECU alone
$150 for wiring alone
Email me at [email protected] as I will probably not be checking this thread often.
I am selling a MEFI 3 controler and well labeled wiring harness. I did not run with this combination, but I'm guessing that since it is from AZM instead of Mercury, it probably has many of the crazy safeties programed out of it that so many people seem to have problems with.
But I know nothing else about this setup, as I did not run it personally, but it did come off a well running boat.
$395 for both
$275 for ECU alone
$150 for wiring alone
Email me at [email protected] as I will probably not be checking this thread often.
Last edited by bcarpman; 02-18-2009 at 08:31 AM.




