2 sets of stcck Merc 575 SCi pistons
01-07-2009 | 06:43 PM
#1
Thread Starter
I hate the winter!!
Joined: Jul 2001
Posts: 2,707
Likes: 0
From: long island, new york
2 sets of stcck Merc 575 SCi pistons
I just did a rebuild of a pair of 575 SCi's. The blocks needed to be bored, so I have 2 sets of stock Merc 4.47 bore pistons, I have no use for.
01-09-2009 | 12:30 PM
#2
Registered
Joined: Jan 2009
Posts: 12
Likes: 0
From: Mesa, Az
Hey Vinney. Are they dished and what rod lentgh? I am going to build a 540 in the future with a huffer from my excisting engine. I need a Gen V 502 block and pistons, will be using my current rotating assy. Let me know, Thanks, Dave.
01-11-2009 | 05:28 AM
#3
Thread Starter
I hate the winter!!
Joined: Jul 2001
Posts: 2,707
Likes: 0
From: long island, new york
I am not 100% certain of the rod length. I am almost sure they used the standard 6.135 rod. While I didnt actually cc the dish, 1 piston was sent to Wiseco to duplicate. They sent back pistons with a -12 cc dish.
