![]() |
Does it have the J-tubes and the marine specific shaft seals? Nickerson told me that he can convert a car carb to a marine carb, but I would just rather provide him with a used marine carb.
|
uh no...
|
Thanks
|
I have 2, Marine, 800 cfm Holley carbs, #9022 that have dyno time only,(they are just like new) if you can use an 800 rather than the 850's. $350ea. + shipping.
Gary Kollofski ph: 763-473-8963 |
I have one on my Donzi that is either an 800 or an 850....haven't been able to determine a model number. The stamping on the horn is 6R 3767 B and it is a 4150 series for sure and is a marine carb FOR SURE. The previous owner bought it and it was supposedly a blue HP 500 carb that someone had powdercoated black. It's either an 80433, which is an 850 cfm or it's an 80466, which I can't find any info on.
It is working fine, just replaced a power valve on it. The plastic electric choke casing is shattered though, I did that just a couple of days ago. I am replacing it with a 650 because it's just too big for my motor. Mechanical secondaries as well. I am going to be using it through the end of this weekend, but I'd take $100 plus shipping if you're interested? But I would use the numbers I put up above from the airhorn and see what it is exactly. Here's some photos: http://www.donzi.net/forums/attachme...1&d=1162059102 http://www.donzi.net/forums/attachme...2&d=1162059102 http://www.donzi.net/forums/attachme...7&d=1170292589 My email is [email protected] if you're interested! Thanks, Howard |
i have a new one ready to go $500 and includes ups/fedex shipping. yes its exactly what you want only new not used. new marine 850 holley from cp.
|
What did they quote you at Nickerson? I may be able to get ya a better deal.
|
|
Originally Posted by IHTFP
(Post 2792303)
I take it you're not interested in my used one so I don't have to keep coming back here? Thanks a lot..... |
HBO,
If you can confirm it is an 850 I would be interested. Nickerson told me to get an 850 not an 800. If you figure out which one it is, let me know. Thanks |
| All times are GMT -5. The time now is 07:04 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.