prop trade
03-18-2009 | 09:31 PM
#3
21 and 42 footers
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
I have a set of 30P Maximus that have been cut down to 15 1/8 and although not "labbed", the leading edges have been thinned/tapered to sharpen the leading edge a little. These run nearly identical to my 28P Max that are labbed and 15 1/2.....plus, I might be interested in those 30's since I tested a set that gave me more rpm's...and more topend. (The Max are great for mid-range)
These 30's were just worked last fall in an attempt to gain something over my 28's......bought with about 10 hours on them, less than 2 hours test time on them since I had them worked.
These 30's were just worked last fall in an attempt to gain something over my 28's......bought with about 10 hours on them, less than 2 hours test time on them since I had them worked.
Last edited by t500hps; 03-18-2009 at 09:41 PM.
03-19-2009 | 07:58 PM
#5
Thread Starter
Registered
Joined: Aug 2006
Posts: 179
Likes: 0
From: LOTO
I have a set of 30P Maximus that have been cut down to 15 1/8 and although not "labbed", the leading edges have been thinned/tapered to sharpen the leading edge a little. These run nearly identical to my 28P Max that are labbed and 15 1/2.....plus, I might be interested in those 30's since I tested a set that gave me more rpm's...and more topend. (The Max are great for mid-range)
These 30's were just worked last fall in an attempt to gain something over my 28's......bought with about 10 hours on them, less than 2 hours test time on them since I had them worked.
These 30's were just worked last fall in an attempt to gain something over my 28's......bought with about 10 hours on them, less than 2 hours test time on them since I had them worked.
03-19-2009 | 08:53 PM
#7
21 and 42 footers
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
