rectangular port cyl heads?
05-04-2009 | 02:45 PM
#1
Thread Starter
Registered
Joined: Sep 2001
Posts: 1,542
Likes: 54
From: Kingsville----lake erie
rectangular port cyl heads?
Looking for a set of good rect port cyl heads for mark 4 454. no cracks, or dropped seats. I can have them freshened if need be but would rather bolt them on.
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
05-04-2009 | 02:58 PM
#2
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Looking for a set of good rect port cyl heads for mark 4 454. no cracks, or dropped seats. I can have them freshened if need be but would rather bolt them on.
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
1000 bucks ,need 2 valves and new springs !!!
Other then that superfine and clean exept there painted purple ?! LOL
Scott
05-05-2009 | 10:11 AM
#3
Platinum Member
Joined: Nov 2006
Posts: 364
Likes: 7
heads
Looking for a set of good rect port cyl heads for mark 4 454. no cracks, or dropped seats. I can have them freshened if need be but would rather bolt them on.
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
Please e-mail [email protected], or reply to this thread.
Thanks, Dave
05-06-2009 | 06:56 AM
#4
Registered
Joined: Mar 2009
Posts: 8
Likes: 0
Cast Iron 502's available
i have a set of 502's i pulled off my 454. they are in good condition. i will send you pictures if you like. complete heads. looking for 750.00. they have 2.3 intakes and 1.88 exh. call or email me if interested. mike 973-296-0433 [email protected]
