Liquidating
 

Working on something that runs. Don't see a need for this stuff any time soon. More stuff to follow but here is a start.

Pair of 850 Blower engines, Merlin blocks, 10-71 BDS, 540CI, Solid roller cams. 1 engine runs good, one has a broken piston. Both have about 65 hours on them.15KOBO

1 set GenIV iron SP heads, Need valve job, but valves are there. $500

1 set Gen V,VI Iron SP heads. Complete. Need valve job. Set up for high lift roller - 500

1 set gen IV 049 style big Oval heads - 500

454-O Intake. 10 hours use painted black - $150

Team G Intake for dominator, square port - $150

Several sets of Crane Gold rockers. Low hours. - $150 set

Several cast aluminum Merc oil pans with dipsticks. Great shape. - $50 each

1 set CMI Tractor headers - satin finish - $1000

1 B&M 250 blower set up complete with nickerson carb and arrestor - non polished - with belt - $1000

1 525SC blower setup, no carb, have arrestor, hoses, 2 differnet pulleys etc. - $1500

1996 Camaro - V-6 - 5 speed. has rod knocking or loose wrist pin. 185K miles. Was going to build a race car out of it, but changed my mind. Still runs, but engine won't last long. $2000

4 GIL exhaust manifolds. Need rebuild. 2 have very small pin holes on top that show up with 25psi air pressure. Can be repaired easily. $500 for all 4

Complete Gen VI 454 MPI long block in crate. Needs rebuild - $500

2 Nickerson 950 carbs in box. Rebuilt 2 years ago - still in box - $750

All prices plus shipping. Paypal accepted, but cash in hand negotiates better.

More stuff to follow later. here are som pics of some stuff.

PM me a pic of:

1 B&M 250 blower set up complete with nickerson carb and arrestor

Carb is a little rough. Beens sitting a while. Buildable, but I have 2 of them and will throw the second in for the same money. So now you get 2 nickersons for the price of 1 blower. :ernaehrung004:

bottom side of intake.

Pics of 177 blower and stuff

Found more stuff.

4 finned Merc valve covers. Good shape. Shine up nicely $150 for all 4 or $100 a pair.

Brand new set of Pro Filer aluminum heads.

365CC runner - 135CC Chamber CNC'd. Built and designed for a large displacement engine with moderate comp. Oversized chamber is designed to lower CR for blower instalation.

Set up for .720 lift solid roller cam. Inconell and stainless.

From Derrebery performance. Never installed. Used them for mock up once.

Take $2750 plus freight.

2 Weiand single plain square port short deck intake manifolds. Great upgrade for 454 & 502 carbed application.

$150 each or both for $200 plus freight.

2 TRS gimbles and 3 inner plates. Need rebuild, but are in great shape. No trim rams.

Make offer plus freight.

Also have a stck on transmission type bellhousings. 2 with single plate cooler, 3 standard. Make an offer

Bravo 2 lowers. $1000 each OBO plus freight.

Pic of tractor headers

Nickerson 950's are part number 4203

Set of 4" GIL mufflers with actuators. pump didn't work when I removed them. Mufflers are in good shape.

The gill manifolds have trs tails?

I don't have any tails

Trade you my Shovel head for the motors and one bell housing??

pics of the nickerson 950 carbs to [email protected]

How much can the shovelhead sell for?

here is one. The other is just like it but further back on the shelf. :cool:

You know its just like anything , only worth what someone is willing to pay. Insured for 22k had someone that wanted it for 17k but deal fell apart .

So sell it for a little less and come get em. :grinser010::cool:

How much for the actuators off the mufflers?
-Mike

Now your talkin BIG Daddy cash is king :ernaehrung004:


Riggerjohn from Loto on the board here had a bad azz bike 4 sale cheap

Mufflers are in the box with the actuators. It all goes together. PM me an offer. I have seen this whole set up go on this site for 12-1400. Give me half of that plus the shipping and you can have it all. :ernaehrung004:

Just needed 1 acutator. But would have bought all you said they didnkt work so i was going to try to rebuild atleast one
Thanks
Mike

All actuators work. The pump doesn't work. I edited the post. Sorry about the confusion

Oh ok nevermind thanks Jeff
-Mike P.S. i have an etra pump for those

Put it on ebay listing with a 12K no reserve. Let it run and bring me the cash. Then you can have all the parts out of that cat on your boat. Bring cash though.

Oh and send me some pics so I can see if anyone around here wants it. [email protected]

You know I would but I'm not the best salesman and I hate dealing with people, to many years doing security for shows. Probably why I either keep stuff for ever or just cut the sh!t up when I'm sick of it and junk it.