Working on something that runs. Don't see a need for this stuff any time soon. More stuff to follow but here is a start.

Pair of 850 Blower engines, Merlin blocks, 10-71 BDS, 540CI, Solid roller cams. 1 engine runs good, one has a broken piston. Both have about 65 hours on them.15KOBO

1 set GenIV iron SP heads, Need valve job, but valves are there. $500

1 set Gen V,VI Iron SP heads. Complete. Need valve job. Set up for high lift roller - 500

1 set gen IV 049 style big Oval heads - 500

454-O Intake. 10 hours use painted black - $150

Team G Intake for dominator, square port - $150

Several sets of Crane Gold rockers. Low hours. - $150 set

Several cast aluminum Merc oil pans with dipsticks. Great shape. - $50 each

1 set CMI Tractor headers - satin finish - $1000

1 B&M 250 blower set up complete with nickerson carb and arrestor - non polished - with belt - $1000

1 525SC blower setup, no carb, have arrestor, hoses, 2 differnet pulleys etc. - $1500

1996 Camaro - V-6 - 5 speed. has rod knocking or loose wrist pin. 185K miles. Was going to build a race car out of it, but changed my mind. Still runs, but engine won't last long. $2000

4 GIL exhaust manifolds. Need rebuild. 2 have very small pin holes on top that show up with 25psi air pressure. Can be repaired easily. $500 for all 4

Complete Gen VI 454 MPI long block in crate. Needs rebuild - $500

2 Nickerson 950 carbs in box. Rebuilt 2 years ago - still in box - $750

All prices plus shipping. Paypal accepted, but cash in hand negotiates better.

More stuff to follow later. here are som pics of some stuff.

PM me a pic of:

1 B&M 250 blower set up complete with nickerson carb and arrestor

Carb is a little rough. Beens sitting a while. Buildable, but I have 2 of them and will throw the second in for the same money. So now you get 2 nickersons for the price of 1 blower.

bottom side of intake.

Pics of 177 blower and stuff

Found more stuff.

4 finned Merc valve covers. Good shape. Shine up nicely $150 for all 4 or $100 a pair.

Brand new set of Pro Filer aluminum heads.

365CC runner - 135CC Chamber CNC'd. Built and designed for a large displacement engine with moderate comp. Oversized chamber is designed to lower CR for blower instalation.

Set up for .720 lift solid roller cam. Inconell and stainless.

From Derrebery performance. Never installed. Used them for mock up once.

Take $2750 plus freight.

2 Weiand single plain square port short deck intake manifolds. Great upgrade for 454 & 502 carbed application.

$150 each or both for $200 plus freight.

2 TRS gimbles and 3 inner plates. Need rebuild, but are in great shape. No trim rams.

Make offer plus freight.

Also have a stck on transmission type bellhousings. 2 with single plate cooler, 3 standard. Make an offer

Bravo 2 lowers. $1000 each OBO plus freight.

Pic of tractor headers

Nickerson 950's are part number 4203