Lots of stock HP500 parts
06-11-2009, 11:18 AM
#12
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
mrfixxall
I'll take pics as requested....
2-pair (4 heads) 088 casting rect port heads... I cleaned them up, but they will need freshining up, have approx 384 hours on them. Make a reasonable offer... will sell seperate pairs or all 4 at once... no singles.
2-Mercury fuel filters and mechanical pumps that mount on seawater pumps. I am guessing they have the same hours as the motors, but worked fine when I took them off last week. Make reasonable offer. SOLD
2-circlating pumps with blue merc v-belt pulleys. Also have the water neck outlets with 4 ports that match this setup. Took this all off to run crossovers instead... there is some corrosion on the water necks but didnt leak when I took them off.
2-Dart (mercury HP500) manifolds, 4150 style, still blue, with 1/2" spacer plates. Water necks have some corrosion, but again didn't leak. Wouldn't hurt to have a little welding done on them, but I don't need them so I am just selling them.
2-Holley 800 cfm (might be 850's), have dual 50cc accelerator pumps, just rebuilt and rejetted for stock HP500's. Electric Choke has been removed, but have ll the peices to put back on. $275/ea??
2-pair of Gil manifolds. Manifolds are in decent shape. $450/pair.
I am open to all reasonable offers, plus shipping.
2-pair (4 heads) 088 casting rect port heads... I cleaned them up, but they will need freshining up, have approx 384 hours on them. Make a reasonable offer... will sell seperate pairs or all 4 at once... no singles.
2-Mercury fuel filters and mechanical pumps that mount on seawater pumps. I am guessing they have the same hours as the motors, but worked fine when I took them off last week. Make reasonable offer. SOLD
2-circlating pumps with blue merc v-belt pulleys. Also have the water neck outlets with 4 ports that match this setup. Took this all off to run crossovers instead... there is some corrosion on the water necks but didnt leak when I took them off.
2-Dart (mercury HP500) manifolds, 4150 style, still blue, with 1/2" spacer plates. Water necks have some corrosion, but again didn't leak. Wouldn't hurt to have a little welding done on them, but I don't need them so I am just selling them.
2-Holley 800 cfm (might be 850's), have dual 50cc accelerator pumps, just rebuilt and rejetted for stock HP500's. Electric Choke has been removed, but have ll the peices to put back on. $275/ea??
2-pair of Gil manifolds. Manifolds are in decent shape. $450/pair.
I am open to all reasonable offers, plus shipping.
thanx
06-11-2009, 12:02 PM
#13
Registered
Thread Starter
Join Date: Mar 2008
Location: League City, Texas
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
06-11-2009, 04:06 PM
#15
Registered
Thread Starter
Join Date: Mar 2008
Location: League City, Texas
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
I am just trying to get the stuff outta my garage.... I'd do 50 for each pump, throw the pulleys in free and the t-stat housings at 15 bucks ea. So total of 130 bucks plus shipping.
06-14-2009, 07:48 PM
#16
Registered
Thread Starter
Join Date: Mar 2008
Location: League City, Texas
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys.... I need to move the Gil Manifolds and dry exhaust risers. Make me a reasonable offer and include shipping and they are yours. They are ready to be shipped. I had them up for 1k each pair, but I see that is too high, so make me an offer. I figure probably 150 bucks for shipping (a pair) since they are big and bulky.
06-15-2009, 08:12 AM
#18
Registered
Thread Starter
Join Date: Mar 2008
Location: League City, Texas
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
06-16-2009, 05:21 PM
#19
Registered
