22 Velocity part out, Seats, tabs, gauges ect
#1
Pirate of the Chesapeake
Gold Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
22 Velocity part out, Seats, tabs, gauges ect
Ok would anybody be interested in this stuff... The boat, as it is not complete, or if you want it minus the drive, transom assembley... Make me reasonable offers on stuff, the tilt wheel, the tabs, the seats(are in good shape no rips other then the one in pic), gauges, the trailer, the hull of the boat.. All the hull it self needs is to be buffed( cracks are in pics), cleans up, check the pick, that was with my finger and water the section of the cross bar for the back seat where somebody cut it out(reasons unknown) needs to be glassed in. It needs stringers and floors... I am open to offers.. If you have any questions email me.. I really don't want to scarp the boat, as it is a project, that just needs the time, that I do not have at this point.... It is sitting on a nice trailer..
[email protected] or PM me
Thanks John Jr
[email protected] or PM me
Thanks John Jr
Last edited by Fenderjack; 09-15-2009 at 08:55 PM.
#7
Registered
Join Date: Mar 2008
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
wow! now that's a project.
would have to be gutted and start from scratch, but would make a decent project boat if the price was right.
I've got a good portion of what would be needed to get a good start on it, and have been sort of looking around for a fast hull project in that size range to run in the river and sound. It would be a great candidate for an all forged low compression 383 or even 434 and a procharger...
what are you looking to get out of it? with / without what? and do you have clear titles on both boat and trailer?
would have to be gutted and start from scratch, but would make a decent project boat if the price was right.
I've got a good portion of what would be needed to get a good start on it, and have been sort of looking around for a fast hull project in that size range to run in the river and sound. It would be a great candidate for an all forged low compression 383 or even 434 and a procharger...
what are you looking to get out of it? with / without what? and do you have clear titles on both boat and trailer?
#10
RIPSTA Racing Team
VIP Member
John, put a price on it as a whole if you don't want to break it up. Someone will buy it if the price is low enough. Major projects are easy to find. Piecing it out will take longer but get you a few more bucks. Shame the hull needs so much work.