Selling it all-Parts &-87 Cafe-90 32 hustler
#16
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
Mike double check the stainless marine manifold, if its the same as mine its the GEN 2, not 3 and its in nice guys I have seen it and retail is like 600 a piece. so 50 is a steal for someone as a back up for there Gen 2 set up. and looked pretty new the last time I saw them. also on the hustler its got the cmi exhaust on it so with a bigger cam change the intake and carb to a DEAN GELLNER set up he ports the intakes in a different way and a custom carb by him that boat would run 90 plus, Harry Turner and others rac them in the old B class in the 80s and 90s so and its not a expensive upgrade either. thats all.
Last edited by AIR TIME; 10-03-2009 at 02:38 PM.
#18
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
motors all set just did not want the springs to be all sprung open and shut for months and the motor sitting all spring ,once I new I was going bigger boat, summer, fall, so this winter its going in something think I found the headers 6'', got the 3 sutphens to look at this month cheap but need to change over to a single, a saber 28 single no power but need to raise the x , and fill exhaust holes more money less work to look at, a used and new joker 28 used is 10 to 16yrs newer than others money not bad, the new sutphens are to much coin I think for a hull, same with banana. and the jokers haul the mail in any water just need to see one. I thought about cat ,but flipping over, insurance,2 motors and being smaller than Gerrys will give two different rides. that chris cat is looking like a good buy since they came down on price.but Dean made a masterpiece of this 572 its called HITMAN series with a custom paint job. so there was one other thats coming out with a 27 or 28ft boat but there big boats cost so much that even a new small hull will most likely be more than what I want to spend and not sure if its coming out this winter or not. so thats it got a guy making a gantry crane for me home made so I can just pull motors and konrad drive here. see yah later.