Selling it all-Parts &-87 Cafe-90 32 hustler
#61
Registered
Join Date: Jul 2007
Location: Hornefors,
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
The only things i know is that the springs where changed to
comp cams and the valves where changed to stainless steel.
When mike bought the boat 2005 and also an MSD was added
Other than that its stock HP500, forgot the circ pumps on the engine is also removed. One pic is when the boat arrived from
the port of gothenburg sweden then up to me by a truck. First run i did with 1/2 tanks and 8 person it ran 71mph. /Erik
I am spinning the props inward and would like to try Bravo one or hydromotives 26 to se if i can gain some speed.
what do you guys think is the best choice ?
comp cams and the valves where changed to stainless steel.
When mike bought the boat 2005 and also an MSD was added
Other than that its stock HP500, forgot the circ pumps on the engine is also removed. One pic is when the boat arrived from
the port of gothenburg sweden then up to me by a truck. First run i did with 1/2 tanks and 8 person it ran 71mph. /Erik
I am spinning the props inward and would like to try Bravo one or hydromotives 26 to se if i can gain some speed.
what do you guys think is the best choice ?
Last edited by ae23; 01-04-2010 at 10:04 AM.
#62
I believe the Hydo's should free up a few more RPM, since they are more of a mixed cleaver style prop and not a full elephant ear it draws less water. I would talk to BBlades or Throttle up they are the exsperts im just going by what ive read over the couple years ive been on OSO and boating.
-Mike
-Mike