Brand New 496CI Stroker Motors - MAKE OFFER!
FOR SALE:
One pair of naturally aspirated, GM Mark IV, 496 cubic inch stroker motors, freshly built, '0' hours. I will consider reasonable offers so don't be bashful! SPECS: GM Mark IV 4-Bolt Main Blocks GM Rectangular Port 990 Casting "Hi-Perf" Cylinder Heads Cylinders were Bored Over .060" Scat 4340 Forged Steel 4.250" Stroke Crankshafts Scat 4340 Forged Steel 6.385" H-Beam Connecting Rods JE/SRP Forged 18cc Dome 4.310" Bore Pistons - 9.8:1 CR Total Seal Classic Race Rings Clevite77 HP Main & Rod Bearings Durabond HP Cam Bearings Manley Severe Duty Valves - 2.250" Intake/1.940" Exhaust Comp Cams Xtreme Marine XM298H Hydraulic Cam Kits (254/264 Duration - .575/.578 Lift - 112* Separation) Comp Cams Roller Rockers Merlin Marine 4150 Intake Manifolds w/Brass Water Jackets ARP Hardware and Fel-Pro Gaskets Throughout Melling HV Oil Pumps & Pickups Milodon Marine Offshore Oil Pans and so much more that I am forgetting . . . These were built to be reliable, fire-breathing 600+ HP monsters for my 35' Cigarette Mistress. I bit off more than I could chew with the project, and wound up selling the hull before it was time to reinstall the engines. They made 613TQ/671HP on my desktop dyno! These are complete from intake to oil pan. Bolt up your accessories and exhaust and go! I have invested much more than what I'm asking, don't miss this opportunity to let my loss be your gain! Located in South Florida. Worldwide shipping available! I'm looking to liquidate all of my odds and ends, and purchase a new boat. If you're interested in the motors, I have photos available, so shoot me an email to: [email protected] Thanks, Harry |
To the top. Looking to make a deal! The operative word being DEAL!
|
I Want These Sold Before New Years Eve . . . Make Me An Offer!
|
how much for 1 send me a pm
|
Email sent..
|
Joe, I responded by email with photos. Please give me a call and let me know what you think I'm anxious to make a deal ASAP.
Cig20, I private messaged you. Please email me or give me a call. Thanks, Harry [email protected] |
got it, I'll call you tomorrow, trying to work out a few things....
|
Joe,
Looking forward to your call. Thanks, Harry |
I've had lots of interest in these by private message and email . . .
I'm looking for offers, ANY OFFERS - don't be embarrassed, you're not going to insult me, and the worst I can say is no! If you have a number in mind for one or both, throw it at me and we'll see if it sticks! I want them gone by Christmas if possible! Harry |
First person to come up with $10k cash for the pair gets them. No more tire kicking, no more time wasting, just a blow out price for anybody who is sincerely interested!
Email me at [email protected] to discuss. I need these sold ASAP! |
|
WHat am i missing here ? this seems like a great deal...
|
motors
Are these motors assembled.Internally or externally balanced.JOHN
|
John:
The engines are completely assembled longblocks, complete from intake to pan. They are internally balanced, fully forged, best of the best, never run, 0 hours. Go back to page one, to the original post, for a spec sheet. Shoot me an email to [email protected], I need them GONE ASAP! Harry |
Dookie:
You're not missing anything. I have a $20k pair of freshly built longblocks that I do not have a boat for, so I need to unload them and utilize the cash elsewhere. $10k if you're interested. Email me at [email protected] Harry |
Harry its Erik,
I bought the bravo one outdrive off of you from ebay. I know we talked over the phone a few times and I gave you plenty of time now. I need the drive now so lets finish this deal already... Call me 732-684-0992 Erik [email protected] |
nevermind
|
Are these still for sale? If so can you post some pics and I will be interested in 1.
|
Whistler, yes, these are still available. I cannot post pics, but I can email them to you - please email me at [email protected] and I'll get them out to you.
Thanks, Harry |
Cig35, I feel your pain. I have a pair of engines that I thought I was giving away but it seems no one is buying engines lately. Another guy has a pair of 540's he's also having a hard time selling. All great deals, no takers. Maybe their waiting until 3 weeks before the season starts to put the pressure on their mechanics? Then they'll be pizzed off when their boat isn't ready until mid season.
|
Nobody has any money :(:(:(
|
Originally Posted by Cig35Mistress
(Post 3003785)
I'm looking for offers, ANY OFFERS - don't be embarrassed, you're not going to insult me, and the worst I can say is no! If you have a number in mind for one or both, throw it at me and we'll see if it sticks!
Harry |
Originally Posted by klaw
(Post 3015076)
OK I can paypal you $5,00 today for both
|
Oops meant to say $5,000 for both
sorry 5 |
I've already turned down $8500 for the pair. I'd take $10k cash. I appreciated the humor and levity though . . .
|
Originally Posted by Cig35Mistress
(Post 3017557)
I've already turned down $8500 for the pair. I'd take $10k cash. I appreciated the humor and levity though . . .
|
Will you sell motors seperate? This has probably already been asked??
|
Yes, I will separate as I may have a use for one, though I'd prefer to sell the pair. Email me at [email protected] to discuss it.
Harry |
What octane will these engines run on? Thanks
|
Thanks VV!
Rush, they were built to run on 93 octane pump gas. Harry |
ttt
|
How much for one
|
|
Originally Posted by crapr6
(Post 3012484)
Harry its Erik,
I bought the bravo one outdrive off of you from ebay. I know we talked over the phone a few times and I gave you plenty of time now. I need the drive now so lets finish this deal already... Call me 732-684-0992 Erik [email protected] Thanks for sending me the upper half of the bravo drive a few weeks ago that I paid for back in NOV.. I know you are going thru tought times,etc but enought is enought. I paypal you for it and I want my drive. Now lets finish this deal. Send me the lower unit with nuts,bolts, gaskets so I can assemble it into a complete Bravo drive!! Erik 732-684-0992 |
whats the hold up sending the drive?
|
:food-smiley-007:
|
Originally Posted by halfbuzzed
(Post 3033138)
whats the hold up sending the drive?
|
I say, ship the Bravo so someone can be confident about buying engines !
|
I'll leave out the responses back and forth to limit the exposure but I will say that if he made good on the drive deal I would reconsider the purchase. Everyone goes through hard times but if you make good on a deal then that's good in my book.
----- Original Message ----- From: To: Crapr6 Sent: Thursday, January 14, 2010 12:16:24 AM GMT -05:00 US/Canada Eastern Subject: bravo drive purchased from ebay Hello I read your post on offshoreonly.com and if you wouldn't mind I would like to find out how your dealings were with the person you purchased the drive from. I am considering buying a motor that he has for sale but it is across the country so I would be buying it sight unseen without knowing for sure that it will ever ship. I am just a little cautious or maybe concerned and it appears that you bought a drive from this same person from ebay so I am curious if you were satisfied with the transaction. Here is the post: crapr6 Registered Join Date: Oct 2008 Location: Toms River, NJ Posts: 302 84 Wellcraft Excalibur 27 Harry its Erik, I bought the bravo one outdrive off of you from ebay. I know we talked over the phone a few times and I gave you plenty of time now. I need the drive now so lets finish this deal already... Call me Crapr6@ |
I can say when I call or email Harry he will respond and he assures me that he will get me the drive. I have waited long enought and since it is winter I gave him time to get his $hit in order..Well as we all know its going to be spring and I want my boat ready.
Erik |
All times are GMT -5. The time now is 03:36 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.