Dart Big M block
12-09-2009 | 07:25 PM
#1
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Dart Big M block
Thinking about selling the TALL DECK 10.2 Dart Big M block I have been saving for a winter project. As I get deeper into my project I come to relize I may not be able to build the big CID motor I wanted. If it sells great...
Its bore size is at 4.606 and should be finished honed to a 4.610 bore, no damage done to the block and can be bored to a 4.625 so plenty of meat left.
$1500 located in Toms River, NJ 08755
Email me at [email protected]
Its bore size is at 4.606 and should be finished honed to a 4.610 bore, no damage done to the block and can be bored to a 4.625 so plenty of meat left.
$1500 located in Toms River, NJ 08755
Email me at [email protected]
12-16-2009 | 11:19 AM
#3
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Block is still forsale. I also have a eagle 4.5 crank and rods 6.535 for $300. Will make this a 600cid motor.
Erik
[email protected]
Erik
[email protected]
12-23-2009 | 12:53 PM
#8
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
