Hydromotive P5 25P
#3
Thread Starter
Registered
Joined: Mar 2006
Posts: 293
Likes: 0
From: Hendersonville, TN
Was (am) running it on a 1997 26SP (28') with an HP 500. Prop works great on hole shot, mid range acceleration but I lost a little top end. Just don't appear to have enough to sping it over about 4700 RPM. I am going to try a hydromotive Quad 4 24-p so would consider taking one in on trade
#4
Registered

Joined: Oct 2000
Posts: 3,785
Likes: 650
From: Lakewood, NY, USA
I am running a 502 with lightnings and reworked ECU. If it doesn't work with a HP500 I doubt if I could use it.
If your 500hp is running good a 24 quad four should be too small. I am running a 26 hydro.
If your 500hp is running good a 24 quad four should be too small. I am running a 26 hydro.



