Looking for an economical set of aftermarket BBC heads. Aluminum rectangular ports 118cc

I've got 1 merlin head I'll make you a good deal on. its a bare casting. You can get the other head from summit, jegs, anywhere! It might not be aluminum but its far better than the chinese knock off stuff out there. Also unless your building a monster BBC you want oval ports not rectangular ports. Much better velocity, which is very important!

Can sell you a set of "new" 088 rectangular port irons. Bare castings, seats ground for 2.19 and 1.88, guides installed, 7/16 studs. All you need is valves, springs, retainers, studs and guide plates. $535.00 plus shipping. Pete

I have a pair of BARE
Dart Iron Eagle 308 heads
brand new still in the Dart Boxes
119 chambers
part number 15100010
They are bare heads fully factory machined. never been assembled
$1100 for the pair
Dan
630-772-3825

Thanks for the offers guys. I'm sure they are all very nice but I am only looking for aluminum. I am a slave to appearances lol.

Glass Cannon -

Give my engine guys a shout and see what they can set u up with. Get them ported - one of the best guys in the biz and very reasonable.

Champion Performance 586.755.7400

You use those guys too? They've done work for some of my friends and I in the past, and always did a great job.

I have 2pair of edelbrock performer heads that are aluminum and are complete ready to bolt on. call me if interested 8564042985 Ryan

I have a pair of these. Dyno time. No valves, springs. Bare castings only.

$500 plus the ride.

http://www.jegs.com/i/Edelbrock/350/...oductId=758339

I have two pairs of bare Dart Pro-1's.

I have not even opened the boxes. I have changed directions.
$1,300 a set + the ride.