Spring Cleaning at Precision Power Offshore
03-04-2010 | 11:19 AM
#22
Thread Starter
Registered
Joined: Mar 2010
Posts: 16
Likes: 0
From: Spring Lake, Michigan
Merlin Heads
World Products Merlin Heads-a little rusty, came off a cobra 750, 612 cid, ported by Cobra (i think they were 320cc before porting), bronze guideliners, came off running, need beadblast valvegrind and assembly. Need to get $200 for the pair plus shipping.
Last edited by precisionpower; 03-04-2010 at 01:09 PM. Reason: sp
03-04-2010 | 11:54 AM
#24
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
I have two sets of Stainless Marine bbc exhauts manafolds with the pipes. You can see them in this picture.
Make a offer. One has a rubbed spot on the side from the hatch lift. It looks bad but no leaks. I used them last year
they sound great and no water reversion with large cams.
Im looking for a used set of headers? Anyone..
Make a offer. One has a rubbed spot on the side from the hatch lift. It looks bad but no leaks. I used them last year
they sound great and no water reversion with large cams.
Im looking for a used set of headers? Anyone..
03-04-2010 | 01:02 PM
#26
Thread Starter
Registered
Joined: Mar 2010
Posts: 16
Likes: 0
From: Spring Lake, Michigan
Merlins, Big Chief Heads, and Jesel items
Big chief heads-complete with titanium valves and retainers, came off 1200hp 653cid Sterling, 99cc chambers, 30 hours since freshened with valve grind and new springs, head gasket receiver groove machined, CNC ported and hand finished by Valako Race Heads, good working condition, only need valve grind and clean up cut to be ready to run. $ 2,500 a pair complete (no rockers) or $3,000 complete with Jesel rocker arms. plus shipping
Jesel rockers arms (for Big Chief Heads) can be purchased seperately for $650 per set. plus shipping
Don't have any used Jesel belt drives. Can get you a brand new belt drive with new solid upper pulley design for $799 plus shipping.
03-04-2010 | 01:08 PM
#27
Thread Starter
Registered
Joined: Mar 2010
Posts: 16
Likes: 0
From: Spring Lake, Michigan
Bravo 1 Gimble Ring (for use with trim senders)
03-04-2010 | 01:21 PM
#28
Registered
Joined: Dec 2008
Posts: 21
Likes: 0
500 efi cam
Many used, takeoff, and some new parts. Crash boxes, transmissions, merlin cylinder heads, big chief cylinder heads, lots of misc. Lots of miscellaneous Bravo parts (no gears), used 454/502/575 SCi Pistons/rods, rocker arms, mechanical roller lifters (std. and .903 diameter), lots of others.
Phone (616) 844-1000 ask for Ben.
Phone (616) 844-1000 ask for Ben.
