Hey guys,

I am looking to convert my boat over to MPI, and need a complete swap. I would need everything from the lower intake up, plus the wiring harness, fuel pump, distributor, etc. Anyone have a complete takeout setup?

I may also be willing to piece one together, so let me know if you have any individual parts. Thanks!!

I have a Mefi 1 and harness, if you're interested.

Rectangular or oval port?

Griswald, PM sent.

Richard, that I am not sure of, what is the easiest way to tell with the intake on? The motor is a 92 model year. Thanks!!

I have a 500efi intake, a set of stock injectors, map sensor, TPS and the idle control motor available.

I have everything you need.
[email protected]

Email sent!!

I have what you need as well. Shoot me an email at

[email protected]

I have it all, but the vst tank, and fuel lines. You will need the mechanical pump also, and a map sensor..

Im looking to do the same thing if anyone has another set up available.