I've got two boost referenced fuel regulators (bypass style)...Mallory brand. Adjustable 3 to 14psi. Summit price $100 each (bare). I'll sell both of these with tees and plumbing for $60 each or $100 for the pair.

I have a Crane 731 (MkIV) hydraulic roller. Good blower cam. Just a touch milder than the 741 cam, but makes good power. I'll sell it for $150. Very low runtime.

I have several sets of valvesprings. Most are what you'd want for a HP525/HP500 or Crane 731, 741 cam.

I have (3) Fluidampr balancers. One is ring only, another is ring and ext/balanced hub that's been run, and one is ring and exthub like new.

All fuel pumps are sold. USPS lost one of the Aeromotive A1000 pumps on its way to Sweden and somebody added some chinese wooden spoons to the box thinking nobody would notice.....

Holler
MC

Dave,
I've been meaning to round those up for you since your last inquiry.
I still have a box of them floating around that I haven't found, but I do know where most of them are. I'll get a list together.

MC

You can have Ron Popeil's dehydrat-o-matic for $18 plus postage. It does make some good banana chips. I been promising myself I would start makign my own jerky, but it's been 5 years and I still havent done so. Time to put it in somebody's hands that will get some use out of it.

And the days of the Dos Equis guy are but a fond and distant memory. The taller the tree, the bigger the boom when it falls... I've been scrounging for grocery money since 2006, and held onto my collections far longer than I ever should have.

MC

I'm thinking $2400 on the 1967.
About $3200 on the 1986.
And $9000 on the 18k President.

Haven't checked the market lately. Dunno if those numbers are in the ballpark or not.

I've been meaning to pull em out and get the numbers off of em and get photos. They're still at a friend's jewelry store in his safe.

MC

No worry, shoot me a PM with your number when you find them. We'll make a deal!

Dave

Message sent on crane pushrods. I would really like some pics of the rolexs' also!!!!!

I can't find the option to edit the earlier posts, so I'm quoting and then editing. MC

EDITED 05/04/2011
CLICK HERE TO SEE MY PHOTO GALLERY

PRICED items
Bravo 1. Fresh rebuild and paint. Excellent...... $2,000
Pair of MSD Digital 6 Plus programmable (rotary switches, not PC serial port) ignition boxes P/N 6520....$350 for pair
Qty (2) MSD Soft Touch Rev Control P/N 8728 - universal (not for Capacitive Discharge Ignitions or Odd-Fire V6). These are brand new in box with all paperwork and harnesses. Comes with 6k, 7k, 8k chips. New Street Price $110. Will sell for $80 each or $140 for pair.
Vortech Boost Timing Master P/N 5462-1 (MSD 5462), low hours, in box with paperwork and harnesses. New Street Price $320. Will sell for $140.
MSD MC-3 Digital Motorcycle Ignition P/N 4223, used, in box with some harnesses. New Street Price $529 (Summit). Will sell for $200.
Qty (2) MSD Pro-Billet Distributors - SBC/BBC(std deck). P/N 85551 (not slip collar models) - New Street Price $230 (Summit). Will sell for $175 each or $300 for the pair.
One Gaffrig drive temp indicator - brand new in box - highly desired discontinued model with stainless probe that goes in drive vent, black gauge, all hardware and paperwork. Retail $230. Will sell for $180.
Pair of boost indexed external fuel pressure regulators and bypass manifolds. Mallory brand. Summit price $99 each. Will sell $65 each or $105 for the pair.
Three BBC Fluidamprs. One like new with ext bal hub $220. One used but good with ext bal hub $140. One outer ring excellent, with no hub $90.
One Crane 731 hydraulic roller cam (MkIV block) P/N 139731. Like new - low hours. Summit price $370. Will sell for $180.
Crane BBC pushrods sized for retrofit tiebar lifters and standard deck BBC. Excellent condition. P/N 13628-16. Summit $149. Will sell for $85.
Crane valvesprings (double w/damper) - low hour - P/N 99895-16. Summit $233. Will sell for $100.
Set of Sealed Power double springs w/damper, brand new in box. P/N VS-1604. RockAuto $220. Will sell for $130.
Three pairs of GM cast aluminum BBC valvecovers - brand new in plastic. $70 each, or $150 for all three sets.
Three MasterLube oil accumulators/pre-oilers. Brand new in box. Black powder coated. With plumbing, start solenoids, wiring harnesses, braided line, paperwork. CP Perf cost $380. Will sell $300 each or $725 for all three.
Pair of Holley 4159 HP950 carbs List 80498-1. They are like new, with "QuickFuel Technology" metering block modifications and upgraded floats. Summit lists this carb new at $769.00. I'll consider $475 each, or $825 for the pair.
(4) adjust-a-jet metering plates for Holley carbs P/N 55001 - new $85. Will sell for $60 each, $100 for 2, $180 for 4.
(2) sets Accel 8.8mm Silicone Plus Spiral Core RFI Suppression. P/N 8844 - Jegs Price $86. Will sell for $55. Both sets for $100.


I will price these on request - not for mysterious reasons, but because I either haven't verified the model numbers or checked around to see what's a good price for em.
Mercruiser +3" exhaust riser spacers (TWO pairs)
One billet top cap for Bravo
Pair of solid-hub first gen (large ear) Mirage props (23")
MSD knock sensor box P/N 8964
Two Accel Supercoils
Pair of Billet water crossovers (BBC)
Pair of polished and anodized fuel pump blockoff plates
One externally balanced BBC flex plate
One electric hatch ram (needs some work)
Handfull of miscellaneous electric linear actuators for various cool uses (long, short, fast, slow, with and without limit switches)
Handfull of pressurized gas struts (for hatches, or for actuator assist..)
Huge box of titanium valvespring retainers. Brand new Iskys, and some low hour Del West, some remachined to a lower height.
Several packages of new valvespring locks. Standard and 7 degree.
One Edelbrock Performer RPM AirGap intake - brand new (BBC rect port)

30hp Johnson 15" electric start outboard motor (1978) with control box and prop
Several more props for above.
Several Merc outboard control boxes and wiring harnesses.
Merc 2.4 V6 - 2:1 lower unit w L&S low water cone and pickup - 14 petal front half - finger ported oval port block - modified port timing - remachined carbs with velocity stacks - ported exhaust chest - shorty exhaust tuner and relieved midsection - one piece heads cut to 180psi - appx 285+ horses - recreational trim and transom bracket - loud, and fast.
Roots supercharger for Merc 2.4 V6 (yes you heard correctly) with 14 petal front half and drive components (no throttle body or injection included).
HotFoot throttle.

Riva factory Yamaha ProMod race motor and factory lightened GP racing hull - 1997/98. Big bore Dan Lamey R&D powervalve cylinders ported for race gas - triple expansion chambers - 48mm carbs - carbon reeds - 5mm welded stroker - ported cases - MSD total loss, Skat race pump, UMI/Renthal controls, drop nozzle, etc. In parts, cylinder bosses are cracked and need repaired.

1986 Honda VFR750F. 7k miles. All there. 4 into 2 in to 1 exhaust. Fox Shock. Revalved forks, custom magnesuim fork brace. Needs rubber and a hydraulic flush and freshen (brake and clutch circuits).

2003 Yamaha FJR1300. Bought wrecked. Have 95% of the parts needed. No time to finish. Runs great.

70% finished Honda minitrail 50 with an RM80 motor in it. Custom progressive rate monoshock rear suspension with extended swingarm. Cut-down interceptor fairing to fit included.

1967 Rolex stainless/14k 2 tone Datejust. 14k champagne face w block markers. 1990 model 18k hands, 18k crown, 18k fluted bezel, stainless and 18k Jubilee bracelet - all Rolex. Runs great. $2,600.

1986 Rolex stainless/18k 2 tone "single quick" Datejust. 18k champagne face with block markers. Jubilee bracelet. Runs great. $3,200.

1992 Rolex 18k President Day-Date (double quick). Sapphire crystal. Completely reworked in 2000 with all new parts (insurance repair from damage from car wreck). Great watch. $9,500.

Yerf Dog 2 seater yard kart with 6hp Tecumseh. Needs belt.

Ronco food dehydrator. Makes great jerky or banana chips. I am told we no longer have room in the kitchen for it, and when I use it in the garage the raccoons find a way in and mess with it.

SOLD ITEMS
SOLD - Imco +3" extension box and transom plate - all parts included....$1,200
SOLD - Two pair of satin finish CMI Elbow tops (BBC) with polished Bravo tailpipes. Leak tested with plumbing.... $3,500 for all
SOLD - Pair of Aeromotive 1000 fuel pumps
SOLD - Pair of polished cast aluminum BBC MkIV timing covers with needle bearing cam buttons.
SOLD - Two sets of inconel Extreme Duty BBC valves (intake and exhaust) in excellent condition.
SOLD - Crane Gold BBC roller rockers - all tested good, some with new needles.
SOLD - Poly-locks for rockers.
SOLD - Three pairs of U-bolt style stud girdles (BBC)
SOLD - Pair of Racor external fuel filter mounts and housings.
SOLD - 1974 Honda XL250 - motor finally locked up from sitting in the shed. Nice nostalgia project bike.
SOLD - 2003 Honda ST1300 sport tour. Great bike. 14k miles. Gloss black. Fresh rubber and brakes.
SOLD - Three sets of low hour Crane hydraulic retrofit BBC roller lifters.
SOLD - Imco +3" extension box and transom plate - missing driveshaft....$800
SOLD - MSD Boost Timing Master P/N 8762, low hours, no box or paperwork. New Street Price $250. Will sell for $140.
SOLD - Six 1" aluminum BBC valvecover spacers
SOLD - One pair of double-beam stud girdles (BBC)
SOLD - Pair of M3 Prochargers and BBC brackets and hardware
SOLD - Pair of AW504 intercoolers with 45* inlet
SOLD - Pair of Procharger blowthru carb boxes
SOLD - McCulloch 4hp outboard motor

My brain hurts, but I have lots more. Oh I'm thinking of more right now - remind me to list my antique/vintage toys that I need to sell, and some of my Klipsch speakers from the 70's and 80's.

1982 Klipsch Heresy speakers - walnut
1966 Marx "Rockem Sockem Robots" in original box.
1966 Murray "Jolly Roger" pedal boat. No motor, lights, or seatcushion, but otherwise all there and in original used condition with original paint.
1958 Tri-Ang horse drawn sulky pedal car. Missing one hubcap - all original.
1940's Lionel Train set. Lots of track, lots of cars, smoking steam engine with whistle car. Tender car, drop bottom ore cars and ore unloader, bridges, etc.

There's plenty more. Just ask.

My email address is on the website linked below.

MC

CLICK HERE TO SEE MY PHOTO GALLERY

How much for the plug wires, and what size / series are they? to 43023?

Can you send me a price on the Mini Trail?

[email protected]

Thanks!

Dave,

The Adjust-A-Jet plates are Holley P/N 55001
I have (4) sets - brand new in package.
They are red anodized with all gaskets, etc.

They go for $85 to $114 new on the "Net. I'll sell mine for $60 each, $100 for two, $180 for all four.

MC (still didn't have chance to get pics of actuators - sorry)