Project 38ft Scarab arneson asd6
07-11-2010, 06:13 AM
#1
Registered
Thread Starter
Join Date: Sep 2006
Location: Harrod, Oh
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Project 38ft Scarab arneson asd6
SOLD!
38ft scarab with or w/o trailer
Bought this boat to use the drives and trailer for another boat and decided to go a different route.
asd6 drives
17x28 pitch props
tranny's
steering
engine mounts
sea strainers
trim pumps
no engines.
Interior is all there however one seat needs new hinge and it had a teak floor that could either be restored or just remove it and put carpet in. the cabin is pretty clean no rips or problems to speak of. The previous owner had the dash screws out not sure what the plan was (new guages?) but I bought the boat less than a year ago and now i just want to put the money towards finishing my other one. It also comes with a wing or radar arch whatever you want to call it but was not bolted up when i got there so you can see we strapped down to the boat.I also polished one of the drives just to see how they would clean up.. there is a pic of that too. with out trailer 6k with trailer 10k firm! PM me.
38ft scarab with or w/o trailer
Bought this boat to use the drives and trailer for another boat and decided to go a different route.
asd6 drives
17x28 pitch props
tranny's
steering
engine mounts
sea strainers
trim pumps
no engines.
Interior is all there however one seat needs new hinge and it had a teak floor that could either be restored or just remove it and put carpet in. the cabin is pretty clean no rips or problems to speak of. The previous owner had the dash screws out not sure what the plan was (new guages?) but I bought the boat less than a year ago and now i just want to put the money towards finishing my other one. It also comes with a wing or radar arch whatever you want to call it but was not bolted up when i got there so you can see we strapped down to the boat.I also polished one of the drives just to see how they would clean up.. there is a pic of that too. with out trailer 6k with trailer 10k firm! PM me.
Last edited by justdreamin; 08-07-2010 at 01:29 PM. Reason: added price.
07-11-2010, 06:31 PM
#3
Registered
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
What's the hull condition like? Any signs of rot?
Can you post some pics of the engine beds and interior?
If you'd like, please email them to me at [email protected]
Any idea if you could get the boat to the west coast (Seattle, WA) how much that would cost? Is it cheaper with or without the trailer to ship interstate?
What were the old engines? (if known)
Cheers,
John
Can you post some pics of the engine beds and interior?
If you'd like, please email them to me at [email protected]
Any idea if you could get the boat to the west coast (Seattle, WA) how much that would cost? Is it cheaper with or without the trailer to ship interstate?
What were the old engines? (if known)
Cheers,
John
Last edited by Ghostrider; 07-11-2010 at 06:48 PM.
07-12-2010, 07:30 AM
#4
Registered
Thread Starter
Join Date: Sep 2006
Location: Harrod, Oh
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
The exterior of the hull seems in good shape. I would put a different rub rail on it... and it has a few scratches above the chine line here and there probably from the dock but they are cosmetic nothing serious and the hull is painted above the chine line and still original gel coat below. No signs of rot. I will try to get some pics loaded tonight or tommorrow morning. I am working right now. The guy i bought it from said it had 454 blower motors and they blew one up. The boat seems pretty solid I don't think it would take a whole lot to get it on the water in fact if you had engines you would really would just need to assemble everything. I have no idea what shipping costs would be... if you are that interested we can look into that... I know there are some guys on here that do that. hope this helps.
07-13-2010, 12:46 PM
#6
Registered
Join Date: Jul 2010
Location: amissville, va
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Iam interested in the boat, tried to contact you through your craigslist ad. Give me a number to call you or call, email, or PM me.
Thank you,
steve
[email protected]
Thank you,
steve
[email protected]
