26P 5 Blade Hydromotives
#1
I have a set, R&L, 5 blade 26P Hydromotives. These where 27's worked down to 26's by Hydromotive. They are like new, polished, no bells, no need for hubs, fit XR shafts with test time only. I had them for my old power but their way too small for the new power. Trying a set of 33 5 blades that might also be available but for now just the 26's. $1200. plus the ride.
Last edited by fireboatpilot; 07-23-2010 at 09:42 AM.
#6
Hey Andy,
Tried the 33 5 blades this afternoon. Blow out real bad while getting on plane but once they hook up their gone til about 90 then I start to porpous. I might try a 6 blade if I can find some to try but I really think I'm gonna wind up spacing the lower down a bit. Boat got really loose at about 95 or so. So the 33's are available, PM me.
Tried the 33 5 blades this afternoon. Blow out real bad while getting on plane but once they hook up their gone til about 90 then I start to porpous. I might try a 6 blade if I can find some to try but I really think I'm gonna wind up spacing the lower down a bit. Boat got really loose at about 95 or so. So the 33's are available, PM me.




