All items are brand new,motors never fired.
Thinking of selling or swaping
Dart standard hight blocks std bore.540 Cu In from Cobra racing
Dart 310cc heads all prepared by Dean Gellner
Inconnel exhaust ect,heads have been anodized
Ross flat top pistons
Howard 4340 billet rod
Howard Pro billet crank
Crane hyd roller cam to deans specs
Morral roller lifters
Crane gold pro 1.7 rockers
manely push rods
Dart adjustable guide plates
Crane billet roller gear and chain set with torrington bearing
Harden 6 valve manual fuel pumps
melling oil pumps
Canton off shore pans,pick ups and dipsticks
Harden oil block offs and remote filters
imco polished alum valve covers
105 amp chromed 1 wire alt.
harden low alt mounts
c&p cam drive water pump timeng chain covers
Harden cam drive chrome brass water pumps
1 custom bracket and power steering pump
c&p stainless bracket for coil,rev limiters an marine boxes
blue 6al boxes
blaster coils
soft touch rev limiters
engine harnesses
MSD dist,and wires 40 hrs on them
Dart powder coated 2x4 tunnel rams for 4130 pattern
XS powmaster torque starters
Hays lightened billet flywheels
alum.alt and steering pulleys
summit billet harmonic balancers
CMI Etop satin bottom and polished top headers,40 hours
All arp fasteners and polished stainless hardware
Top end By Dean
Lower end assembled balanced and clearenced by HAT racing here in baltimore he is a friend and has been doing these motors for 35 plus years.I have cam and engine speck sheets
Motors have never been fired. all they need is carbs a little last minute touches and they are ready.
Looking at offers(have no clue what they are worth )I know what I have in parts and labor.
I'm thinking around 40,000 I might be way off
will entertain offers or swaps or a smaller single engine cat
mail me at [email protected] JOHN

pics?

ttt

ttt

with a touch of Gellner there worth 50,000, I thought you were keeping motors for a cat, have you tried selling boat with power for 75,000 its a option you should have good luck boat looks nice in the pics and hp must be around 725 to 750hp I would think all dressed with wiring hoses headers are 7grand 2 sets thats 10 to 12 grand right there for the rest, mines not done and I have 10 into dressing and need about 2gs to finish. god luck if someone was smart theyed grab the boat and motors which should run a 100 with that power. good luck john and watch out for cats under 30ft they can bite you. I had a good rides in a 30spectra with trip 2.5s pushing 285hp.

ttt

pics please [email protected]

Ttt

Pics would help you.

ttt