Great deal on Outdrive Security System
08-23-2010 | 09:51 AM
#1
Thread Starter
Charter Member #34
Joined: Oct 2000
Posts: 7,151
Likes: 2
From: Beautiful North Carolina
Great deal on Outdrive Security System
I've never had an outdrive stolen and I contribute that in part to these extremely well engineered locks.
The are made for the Mercury Bravo series outdrives used in the late 90's through the early 2000's. I used them with 2002 model XR drives.
They are very easy to install, they look really sharp on the drives and they make theft almost impossible without a key or a cut off wheel and a lot of time.
I'm selling because I no longer have Bravo drives on the boat.
$50.00 gets the pair + $10.00 shipping
The are made for the Mercury Bravo series outdrives used in the late 90's through the early 2000's. I used them with 2002 model XR drives.
They are very easy to install, they look really sharp on the drives and they make theft almost impossible without a key or a cut off wheel and a lot of time.
I'm selling because I no longer have Bravo drives on the boat.
$50.00 gets the pair + $10.00 shipping
08-23-2010 | 10:05 AM
#2
Registered
Joined: Jan 2005
Posts: 4,820
Likes: 374
From: IL
I've never had an outdrive stolen and I contribute that in part to these extremely well engineered locks.
The are made for the Mercury Bravo series outdrives used in the late 90's through the early 2000's. I used them with 2002 model XR drives.
They are very easy to install, they look really sharp on the drives and they make theft almost impossible without a key or a cut off wheel and a lot of time.
I'm selling because I no longer have Bravo drives on the boat.
$50.00 gets the pair + $10.00 shipping
The are made for the Mercury Bravo series outdrives used in the late 90's through the early 2000's. I used them with 2002 model XR drives.
They are very easy to install, they look really sharp on the drives and they make theft almost impossible without a key or a cut off wheel and a lot of time.
I'm selling because I no longer have Bravo drives on the boat.
$50.00 gets the pair + $10.00 shipping
Thanks.
Take pay pal?
I got ITS so no prob.
08-23-2010 | 10:55 AM
#4
Thread Starter
Charter Member #34
Joined: Oct 2000
Posts: 7,151
Likes: 2
From: Beautiful North Carolina
My boat originally came with Latham Steering from the factory with the piece that mounted to the top of the drive and hung off the back. It worked fine and I later switched over to the IMCO 5 bolt back cap for the steering and tie bar and had no issues there either. It should work but I cannot tell you 100%.
