B1 Gimbal housing needed
09-10-2010 | 05:30 PM
#1
Thread Starter
Registered
Joined: Feb 2009
Posts: 181
Likes: 0
From: Arlington, TX
B1 Gimbal housing needed
It has been discovered that my Gimbal assembly has a crack in it. Ayone have a good one laying around for a Bravo 1 (it's a 1997, don't think that makes a difference though)? I don't need the rams or inner tansom plate, just the gimbal assembly. I found one on Ebay for $500, but I'm hoping someone has one for a less on here that is just taking up garage space. I'm nearing the end of my funds for this rebuild/repower, and every dollar saved makes a huge difference. Thanks!
09-11-2010 | 08:09 PM
#2
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
It has been discovered that my Gimbal assembly has a crack in it. Ayone have a good one laying around for a Bravo 1 (it's a 1997, don't think that makes a difference though)? I don't need the rams or inner tansom plate, just the gimbal assembly. I found one on Ebay for $500, but I'm hoping someone has one for a less on here that is just taking up garage space. I'm nearing the end of my funds for this rebuild/repower, and every dollar saved makes a huge difference. Thanks!
