Slightly used parts on great shape
 

Speedmaster drive spacers. Studs, O- rings all still in box from when I got them. Fit 3,4,5 series drives. $1000

Merc Blue valve covers - $150 - Great shape

TEAM G intake manifold for dominator flange carbs - $150

Water distribution tubes for Stelling exhaust. These tubes are $150 each from stelling. I will sell all 4 for $100, they all ready have the screw on fitting welded onto the end.

OK, I still am waiting payment on some of this but here is what is sold so far.

Intake - pending
blue covers - pending
Drive spacers still available - OFFERS??
Water tubes - available

2 good dominator carbs. These are the 1100's - $200 each

Purple grab handles - 3 are shown, they have scratches on the back but can be re powder coated. I have a total of 5 of them. $125 for all 5

Bunch of MSD stuff. 2 brand new socket style caps that are brand new. 1 HEI style cap. 2 sets of plug wires. 1 set is for socket style distributor (brand new). 1 set is for HEI style, they are barely used, but they are dirty. 1 MSD stainless mounting plate, 3 MSD wire hold down covers. 1 good MSB box. It just came back from MSD after testing. They said everything was good on it. 1 MSD advance kit with springs and bushings. All of the MSD stuff for $200

Everything in this post is pending. Will update tomorrow afternoon. - Thanks

more pics

These are pending. Will update tomorrow.

2 guage set. 4 drive and trim switch panels.

there is 18 guages.

2 each
tach
fuel pressure
fuel level
amp
oil temp
oil pressure
water pressure
hour meters

The drive and trim switches all work. There are 4 seperate panels. They are pre wired. These retail at $315 each panel from Livorsi. They need to be cleaned and re powder coated.

Sell all the guages and the purple trim rings for $200. They still look and work fine.

Sell all 4 switch panels for $50 each.

Some of this is pending

Pair orange valve covers. $50
4 blue finned aluminum valve covers. $50 for all 4
1 pair tractor style headers - $500 - no tails.

Bravo 2 Lowers. $250 each. They are in good shape. 1.5:1 ratio

All valve covers are pending. Headers and drives still available - OFFERS??

If you can ship to Australia,

I'll take one of the 1100 Dominators, the Team G Intake and the MSD Gear please

If my math is correct (which it often isn't) that makes it $550 is that right?

Please let me know if this works for you I'll PM you my address to confirm.

Thanks,
John

Send me a PM. I will have to check on shipping for you in the AM. yes $550 is correct plus the shipping. Thanks,Jeff

PM Sent, Thanks Jeff.

John.

Will the Blue Merc valve covers fit a 454?

Hi, if the blue fined and the orange valve covers are not spoken for i will take all of them just let me know