Slightly used parts on great shape
10-26-2010 | 12:44 AM
#1
Thread Starter
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Slightly used parts on great shape
Speedmaster drive spacers. Studs, O- rings all still in box from when I got them. Fit 3,4,5 series drives. $1000
Merc Blue valve covers - $150 - Great shape
TEAM G intake manifold for dominator flange carbs - $150
Water distribution tubes for Stelling exhaust. These tubes are $150 each from stelling. I will sell all 4 for $100, they all ready have the screw on fitting welded onto the end.
OK, I still am waiting payment on some of this but here is what is sold so far.
Intake - pending
blue covers - pending
Drive spacers still available - OFFERS??
Water tubes - available
Merc Blue valve covers - $150 - Great shape
TEAM G intake manifold for dominator flange carbs - $150
Water distribution tubes for Stelling exhaust. These tubes are $150 each from stelling. I will sell all 4 for $100, they all ready have the screw on fitting welded onto the end.
OK, I still am waiting payment on some of this but here is what is sold so far.
Intake - pending
blue covers - pending
Drive spacers still available - OFFERS??
Water tubes - available
Last edited by jeff1000man; 10-26-2010 at 11:12 PM.
10-26-2010 | 12:52 AM
#2
Thread Starter
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
2 good dominator carbs. These are the 1100's - $200 each
Purple grab handles - 3 are shown, they have scratches on the back but can be re powder coated. I have a total of 5 of them. $125 for all 5
Bunch of MSD stuff. 2 brand new socket style caps that are brand new. 1 HEI style cap. 2 sets of plug wires. 1 set is for socket style distributor (brand new). 1 set is for HEI style, they are barely used, but they are dirty. 1 MSD stainless mounting plate, 3 MSD wire hold down covers. 1 good MSB box. It just came back from MSD after testing. They said everything was good on it. 1 MSD advance kit with springs and bushings. All of the MSD stuff for $200
Everything in this post is pending. Will update tomorrow afternoon. - Thanks
Purple grab handles - 3 are shown, they have scratches on the back but can be re powder coated. I have a total of 5 of them. $125 for all 5
Bunch of MSD stuff. 2 brand new socket style caps that are brand new. 1 HEI style cap. 2 sets of plug wires. 1 set is for socket style distributor (brand new). 1 set is for HEI style, they are barely used, but they are dirty. 1 MSD stainless mounting plate, 3 MSD wire hold down covers. 1 good MSB box. It just came back from MSD after testing. They said everything was good on it. 1 MSD advance kit with springs and bushings. All of the MSD stuff for $200
Everything in this post is pending. Will update tomorrow afternoon. - Thanks
Last edited by jeff1000man; 10-26-2010 at 11:13 PM.
10-26-2010 | 01:05 AM
#4
Thread Starter
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
2 guage set. 4 drive and trim switch panels.
there is 18 guages.
2 each
tach
fuel pressure
fuel level
amp
oil temp
oil pressure
water pressure
hour meters
The drive and trim switches all work. There are 4 seperate panels. They are pre wired. These retail at $315 each panel from Livorsi. They need to be cleaned and re powder coated.
Sell all the guages and the purple trim rings for $200. They still look and work fine.
Sell all 4 switch panels for $50 each.
Some of this is pending
there is 18 guages.
2 each
tach
fuel pressure
fuel level
amp
oil temp
oil pressure
water pressure
hour meters
The drive and trim switches all work. There are 4 seperate panels. They are pre wired. These retail at $315 each panel from Livorsi. They need to be cleaned and re powder coated.
Sell all the guages and the purple trim rings for $200. They still look and work fine.
Sell all 4 switch panels for $50 each.
Some of this is pending
Last edited by jeff1000man; 10-26-2010 at 11:13 PM.
10-26-2010 | 01:07 AM
#5
Thread Starter
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Pair orange valve covers. $50
4 blue finned aluminum valve covers. $50 for all 4
1 pair tractor style headers - $500 - no tails.
Bravo 2 Lowers. $250 each. They are in good shape. 1.5:1 ratio
All valve covers are pending. Headers and drives still available - OFFERS??
4 blue finned aluminum valve covers. $50 for all 4
1 pair tractor style headers - $500 - no tails.
Bravo 2 Lowers. $250 each. They are in good shape. 1.5:1 ratio
All valve covers are pending. Headers and drives still available - OFFERS??
Last edited by jeff1000man; 10-26-2010 at 11:14 PM.
10-26-2010 | 01:16 AM
#6
Registered
Joined: Jul 2008
Posts: 730
Likes: 1
From: Darwin, Australia
If you can ship to Australia,
I'll take one of the 1100 Dominators, the Team G Intake and the MSD Gear please
If my math is correct (which it often isn't) that makes it $550 is that right?
Please let me know if this works for you I'll PM you my address to confirm.
Thanks,
John
I'll take one of the 1100 Dominators, the Team G Intake and the MSD Gear please
If my math is correct (which it often isn't) that makes it $550 is that right?
Please let me know if this works for you I'll PM you my address to confirm.
Thanks,
John
10-26-2010 | 01:21 AM
#7
Thread Starter
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
If you can ship to Australia,
I'll take one of the 1100 Dominators, the Team G Intake and the MSD Gear please
If my math is correct (which it often isn't) that makes it $550 is that right?
Please let me know if this works for you I'll PM you my address to confirm.
Thanks,
John
I'll take one of the 1100 Dominators, the Team G Intake and the MSD Gear please
If my math is correct (which it often isn't) that makes it $550 is that right?
Please let me know if this works for you I'll PM you my address to confirm.
Thanks,
John
