Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
NEW Insta Trim Tab Indicator/Gauge >

NEW Insta Trim Tab Indicator/Gauge

Notices

NEW Insta Trim Tab Indicator/Gauge

Thread Tools
 
Old 11-09-2010 | 07:13 PM
  #1  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default NEW Insta Trim Tab Indicator/Gauge

NEW Insta Trim Tab Indicator
(Says Insta Trim 200 on the front of the gauge)
Measures 3 1/4" Diameter overall.
Inner diameter for the hole cut is 2 1/2"
$75 shipped to your door.
I have quite a few of these left.

Please make sure this is the correct one you need. I dont want to worry about returns because it was the wrong part. Both plug ins on the back have 10 pins per side. Id say these are tough to find. PM or post here if interested.
Attached Thumbnails NEW Insta Trim Tab Indicator/Gauge-dsc04144-large-.jpg   NEW Insta Trim Tab Indicator/Gauge-dsc04146-large-.jpg  
TEAMBAJA is offline  
Reply
Old 11-10-2010 | 08:12 AM
  #2  
Registered
 
Joined: May 2006
Posts: 1,628
Likes: 2
From: Huntsville, AL
Default

mine are showing one all the way down and one all tehw ay up , but the tabs work and are both up. think Think its the indecator or something in the tab itsself.
mittens is offline  
Reply
Old 11-10-2010 | 12:34 PM
  #3  
Registered
 
Joined: Sep 2007
Posts: 1,051
Likes: 0
From: Bettendorf, Iowa
Default

My buddy has a hammer and that gauge looks the exact same. ill take it
Fixxxer22 is offline  
Reply
Old 11-11-2010 | 12:15 PM
  #4  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

Originally Posted by mittens
mine are showing one all the way down and one all tehw ay up , but the tabs work and are both up. think Think its the indecator or something in the tab itsself.
I know alot of these gauges went bad, but I couldnt guarantee yours is bad. Hopefully some of these other guys that are buying these can chime in with their experience after they get them installed. I know there are a few threads on this subject but I dont recall anyone following up with progress.
TEAMBAJA is offline  
Reply
Old 11-14-2010 | 06:03 PM
  #5  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

Originally Posted by Fixxxer22
My buddy has a hammer and that gauge looks the exact same. ill take it
Request sent.

Still have a bunch of these left.
TEAMBAJA is offline  
Reply
Old 11-16-2010 | 12:18 PM
  #6  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

ttt
TEAMBAJA is offline  
Reply
Old 12-17-2010 | 11:16 AM
  #7  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

bump
TEAMBAJA is offline  
Reply
Old 12-19-2010 | 02:27 PM
  #8  
Registered
 
Joined: Nov 2010
Posts: 2
Likes: 0
From: Woodriver,il
Default

my trim tabs work but the guage shows only the right side lights, nothing on the left side . so i would think it is the lights in the gauge. what i dont know is how to get the old one out. from the photo it looks like there is one nut that holds the unit in , but how do you get behind the dash to get to it? its on a 2001 Baja outlaw 25.

thanks Randy
racen4 is offline  
Reply
Old 06-20-2011 | 09:21 PM
  #9  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

I still have some of these available.
TEAMBAJA is offline  
Reply
Old 06-23-2011 | 08:18 AM
  #10  
TEAMBAJA's Avatar
Thread Starter
Registered
 
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
Default

I found a couple of these in black, as well as some ribbons and other misc parts.
TEAMBAJA is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.