88 24' project boat
01-08-2011 | 08:58 PM
#17
Thread Starter
Registered
Joined: Oct 2006
Posts: 1,109
Likes: 11
From: Baltimore, MD
Tahiti
There is no rot what so ever the floor was completely redone in 2000 but had only seen the water 3 times since then. interior needs to be redone for the most part the bolster seats are a 6 bench seat 6-7 sun pad was rotted so I made a new one but have not recovered it. cabin is probably a 7. not sure if you could tell from my pics but the windscreen needs to be finished. it has a bravo drive but not sure if I am selling it with the boat yet. I was redoing this boat, I put my blower motor in it and ran it one time brought in checked the filter and found metal in it, pulled the motor tore down and found nothing wrong with it at that point I lost interest.
01-09-2011 | 11:59 AM
#19
Thread Starter
Registered
Joined: Oct 2006
Posts: 1,109
Likes: 11
From: Baltimore, MD
I think it has 8' ft beam the gelcoat needs to be wet sanded and buffed. I wet sanded and buffed a corner of it and shined up nicely. honestly it looks like it needs a lot of work but if I had a week I could have it together.
