Ray-lar Big Power cylinder head.
12-02-2010 | 01:00 PM
#1
Thread Starter
Gold Member
Joined: Jan 2006
Posts: 536
Likes: 3
From: Gilbertsville, Ky
Ray-lar Big Power cylinder head.
I have one Ray-lar Marine 496 Big Power Head. This Head is complete it has 25 hrs run time on it. The engine broke a piston and ruined everything but this head and the crank shaft.
The bottom has some small spots in the combustion area from debry moving through it after it broke. I would recommend a valve job and a little clean up and you will have a like new cylinder head. I will give you the other head if you want it. This was on a 2001 496 ho mag.
Big power kit 103 I think these heads are $1500.00 each
Ill take $600.00 for it plus shipping and if you want the broken
head just the shipping.
Thanks Timmy. day 270 575-0204 night 270 331-0695
The bottom has some small spots in the combustion area from debry moving through it after it broke. I would recommend a valve job and a little clean up and you will have a like new cylinder head. I will give you the other head if you want it. This was on a 2001 496 ho mag.
Big power kit 103 I think these heads are $1500.00 each
Ill take $600.00 for it plus shipping and if you want the broken
head just the shipping.
Thanks Timmy. day 270 575-0204 night 270 331-0695
