PSI blower and manifold
#1
Registered
Thread Starter
Join Date: Jan 2011
Location: Keystone Heights,FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
PSI blower and manifold .....SOLD!
1 PSI 200c blower(reconditioned by PSI before purchased)never used $4000.00.Also have custom Rick Santos blower manifold for SBC with 23* heads.$2000.00.Manifold is new,never used.Will e-mail pics when requested.PM me for info.
Last edited by pjdIII; 02-14-2011 at 06:55 AM. Reason: SOLD
#4
PF Marine
Platinum Member
Most people on here are looking for the 206b (gas) model. You might want to try www.insidetopalcohol.com if you haven't already. They have a free classifieds/forum section.
#5
Registered
Thread Starter
Join Date: Jan 2011
Location: Keystone Heights,FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Already posted on inside top alcohol.This is the prototype for all they're other big twin screw blowers.Roger Olander of PSI recommended we post this on a boat forum.He said this would be great for a boat application.Was originally going to be used on a hot rod project(blown T-bucket with a SBC).
#7
Registered
Join Date: Aug 2007
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Join Date: Aug 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
In my opinion you might want to lower your price on the blower. Those early model 200 series that I have seen usually sell for 2000 - 2500 max. Just some information for you. I have seen them sell for less also.
#9
Registered
Thread Starter
Join Date: Jan 2011
Location: Keystone Heights,FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
That might be true for one thats been used and has high hours on it.This one has never been used.Roger Olander went thru this blower before purchased.The blower has 0 hours on it.We were also told by roger that the price was fair for the condition the unit is in.We are also including shipping and insurance.I have over $5000.00 invested in it.
#10
Registered
Thread Starter
Join Date: Jan 2011
Location: Keystone Heights,FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Do you have belts, pullies, snout? Also email me some pics.
[email protected]
[email protected]