Looking for Used 525 headers
#5
Registered
Gino
If you are using them as a single application, I can get the "down turn" tail pipes also. For me having two different tail pipe set ups would not be "symetrical".
Or my "leaking" header set can be repaired, which I AM working on.
P
http://www.offshoreonly.com/forums/s...ers-525-a.html
If you are using them as a single application, I can get the "down turn" tail pipes also. For me having two different tail pipe set ups would not be "symetrical".
Or my "leaking" header set can be repaired, which I AM working on.
P
http://www.offshoreonly.com/forums/s...ers-525-a.html
#6
Gino
If you are using them as a single application, I can get the "down turn" tail pipes also. For me having two different tail pipe set ups would not be "symetrical".
Or my "leaking" header set can be repaired, which I AM working on.
P
http://www.offshoreonly.com/forums/s...ers-525-a.html
If you are using them as a single application, I can get the "down turn" tail pipes also. For me having two different tail pipe set ups would not be "symetrical".
Or my "leaking" header set can be repaired, which I AM working on.
P
http://www.offshoreonly.com/forums/s...ers-525-a.html
#7
Registered
Contradiction in terms, Gino = -->> tight budget. That’s a good one... but if you want them eventually, just let me know. I might have a used, good set next week. I will probobly change out all four, two I have to, so mind as well go all four.
#9
Registered
isnt mercury marine the only one that call sell the sport tubes for the 525,,,anything else would have to be redrilled to match the heads,,,not talking about the gen x,s ,,,i know those will bolt right up,,,