selling my procharger kit. its complete with carb ox, gaskets, all brackets, hardware, spacers, will include polished aluminum IC pipe kit. thermostat housing, rubber boots, clamps, belts, two pulleys, crossover tube...etc.........and it has the bigger of the two intercoolers

the only thing missing is an air filter. complete kit. bolt it on an run.

the kit was bought new in 2007 and installed a year later. used for one season. it has been in boxes in my garage for the last year or so and i have decided to go NA cus i just dont want to clutter up my engine bay.

i also have a nice maganfuel boost referenced FPR i will let go with the kit as well.


first $2000 takes the whole kit.

phone number is 606 575 0208. gimme a call

Would this fit a 502? Give me a call. 405-519-5283. Ryan

bump

possibly send pics to [email protected] Thanks. By the way any clearance problems in your scarab? mine is an 88'.

send pics to [email protected] please

pics sent to all above...

the engine bay has plenty of room especially if you remote mount the IC. if you mount it on the engine its close to the front firewall (if your boat has one) but is managable. i have since went back to NA just for ease of operation and simplicity.

bump

this is a low hour kit that includes alot of extras. Autometer boost and fuel pressure gauges, maganfuel boost referenced FPR, iC pipe kit, extra oil for procharger, new v belts, 2 serpentine belts, 2 blower pulleys, etc....

i can ship cheap. needs to go

40 hours run time. serial number on the compressor is 74838
$2000 incl shipping to your door.


-autometer fuel pressure gauge
-autometer boost gauge
-installation instructions
-brand new IC pipe kit with boots and clamps $184
-magnafuel boost referenced FPR $200
-2 brand new DAYCO belts (power steering and ALT) $50
-onboard IC mounting brackets
-remote IC mounting brackets
-oil filter relocation bracket (new)
-billet alt bracket
-billet PS bracket
-carb box
-carb box gasket (new)
-all aluminum spacers required
-procharger custom thermostat housing
-5 lb blower pulley
-7 lb blower pulley
-crank drive pulleys and spacers
-"j" vents for holley carb (new)
-all rubber couplers and clamps required (some are new)
-idler pulley assembley
-main mounting bracket
-504 intercooler
-procharger billet crossover tube
-all bolts/nut are included

will you ship it to sweden for 2k?
br