420 w/ transmissions and TRS drives complete
#1
Thread Starter
Registered
Joined: Feb 2009
Posts: 319
Likes: 0
Two complete fresh Mercuruiser 420 engines, dyno time only, full rebuild, new forged crankshaft std/std, block .030 over, small dome LS-6 style forged pistons, rectangle port GM heads, 420 hydraulic flat tappet camshaft, new dual plane intake manifolds, Holley, Thunderbolt ignition. TRS drives have been inspected and re-sealed, they have had external hydraulic steering installed their entire use. Minimal corrosion, mostly fresh water use. GIL offshore style exhaust with polished stainless risers. These two packages are complete with all accessories, wiring harness, starters, transom assemblies, trim pumps and hoses. Basically if you have a TRS bare hull, this would be the complete power and drive package to power the boat with fresh power. I prefer not to separate these packages. Total price for everything is $12,000. Trades will be considered.
#2
Registered

Joined: May 2009
Posts: 69
Likes: 0
#3
Registered

Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
#6
Registered
Joined: Apr 2011
Posts: 97
Likes: 0
From: South Jersey



