Ona-Mission

Casting number 10051107
2pc rear main.

I posed this one time before and get sidetracked with other priorities. I'm back to make it happen.

kidapache

I have a gen four tall deck with steel 4.350 bore cap for $1000

deadlyhammerhead

I have 1 Gen. IV 4 bolt main STD. boar and STD. rods and mains. it has extra low Hrs. maybe 20.

Ona-Mission

Im interested. I tried to pm you, but your full. pm or call me please.

Pat
989-233-0878

Ona-Mission

thanks, but i dont need a tall deck.

Ona-Mission

anyone?

kpot

what size bore are you looking for?

Ona-Mission

id prefer to start with standard or slightly over. We are going to bore it to the max, however i dont want a tall deck. Im trying to match the other side.

Budman II

iTrader: (1)

Are you looking for something to rebuild, or do you need one ready to go? I have a .030 over Mk IV 454 that needs a refresh. Cast crank, 2-bolt main with forged Speed Pro pistons. It had 2 pistons that lost a chunk off the ring lands, but no damage to bores. It could possibly go back .030, but I would take it out to .060 to be safe. I also have a couple of sets of oval port heads that can go with it - one set of 820 casting heads that have had 2.19 intakes installed, and a set of stock 781 casting heads.

PM me if you are interested.

Ona-Mission

bump