ballon78

I bought this complete BRAND NEW, not a reman. This is 502 GM Marine crate motor new last year. Have reciept from purchase and was $6000.00 Its a standard 415hp 502 Gen 6 Rollor cam motor. Ran for one season, maybe 50hours, fresh water. Pulled motor last sept, and was going to build it to a hp500 but my boat burnt in a fire a few month ago. Complete motor was in my house and untouched.

Had machine shop, do a very light hone , jet wash, and clean block, everything was perfect, no wear on anything, motor looked brand new when i took it apart. Have all parts to put back together, heads just need valve seals as i removed them and was going to have head jet washed and inconell valved installed but lost boat. I reasembled heads but they will need new seals only.

Block has been inside, heated all winter shinkwraped on a small pallet like i got it from machine shop.

Had crank checked, and micro polished, but was perfect also.

Will need to be reassembled, new rings, gaskets, and valve seals, have everything else.

Will ship on pallet, but buyer must set up frieght, i do have loading dock and have shipped engines/drives to members before.

$3800.00 plus ride

josh 978 273 2751

ballon78

Everything is included to build an entire long block back up, minus the gaskets, rings, bearings, seals. Heads to Pan complete just assemble.

ballon78

ttt

lower price, may spilt up parts, if i get a few that want most of it

$3500

ballon78

$3000 takes it. Want out of my living room!!!! Ready to be built!

hpnic

Does it have the cam/lifters? Where are you located?

ballon78

Yes, everything to make a complete long block. Pan to valvecovers. Lifters, pushrods, roller cam, rockers, studs.....everything!!!

Located in MA, you can ship this whole engine for 175-225 if u shop around, that what I have done in the past. I bought a complete motor from Oklahoma two years ago and paid 169.00 shipped.

ballon78

Sold.