496 Merc Aluminum manifolds with stainless risers
06-02-2011 | 09:56 AM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 2,296
Likes: 3
From: Lake Travis ,Texas
496 Merc Aluminum manifolds with stainless risers
will fit 454 and 502 is you relocate the stuff you have bolted to the stock manifolds.
(throttle bracket / oil filter)
look new inside, will post pics in next day or two but they look just like any other 496 Mercury manifolds.
Supposedly good for 10-15hp over stock 454 manifolds and much less weight .
These will flow as good as some aftermarket manifolds for WAY less money..
I just put a pair on my buddies 454Mag and they fit great and it was a noticeable difference in sound over the stockers.
First $500+shipping gets them
[email protected]
(throttle bracket / oil filter)
look new inside, will post pics in next day or two but they look just like any other 496 Mercury manifolds.
Supposedly good for 10-15hp over stock 454 manifolds and much less weight .
These will flow as good as some aftermarket manifolds for WAY less money..
I just put a pair on my buddies 454Mag and they fit great and it was a noticeable difference in sound over the stockers.
First $500+shipping gets them
[email protected]
Last edited by HTRDLNCN; 06-02-2011 at 09:59 AM.
06-02-2011 | 10:54 PM
#2
Registered
Joined: Aug 2009
Posts: 125
Likes: 0
06-04-2011 | 11:47 AM
#4
Thread Starter
Registered
Joined: Nov 2003
Posts: 2,296
Likes: 3
From: Lake Travis ,Texas
