Top Gun Race Hatch
06-02-2011 | 06:53 PM
#1
Thread Starter
Registered
Joined: Aug 2004
Posts: 375
Likes: 0
From: MI
Top Gun Race Hatch
This hatch will fit a side x side Top Gun, when I made mine I pulled three from the mold. This is the last of the three that were made. I did set it on my boat to check the fit and it is close. It does need some work for the final fit and finnish.
I want $3200.00 for it.
I want $3200.00 for it.
06-02-2011 | 08:59 PM
#4
Thread Starter
Registered
Joined: Aug 2004
Posts: 375
Likes: 0
From: MI
it is about 70" along the outside edge front to back
and 78 3/4" accross at back edge.
It was the lightest of the three I think it weighed 160 or 180lbs
I dont recall the exact weight.
It is more then strong enfough to walk on.
and 78 3/4" accross at back edge.
It was the lightest of the three I think it weighed 160 or 180lbs
I dont recall the exact weight.
It is more then strong enfough to walk on.
Last edited by dnebo; 06-02-2011 at 09:06 PM.
06-03-2011 | 05:34 AM
#6
Registered User
Joined: May 2007
Posts: 709
Likes: 15
From: S.E. PA.
