BBC & Bravo stuff
#1
Registered
Thread Starter
Join Date: Sep 2008
Location: Oley Pa.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
BBC & Bravo stuff
The last 3 years saw a major resto and upgrade of my Checkmate 234 Persuader and the used parts are piling up. I have pics of most parts, please PM me with an email addy and i'll send 'em right over. Make a reasonable offer and they are yours. All parts are for a big block chevy (some may fit SBC).
Stock Thunderbolt ignition system that came directly off my 454 mag, includes distributor with only a few hours on new pick-up module, cap and rotor. Somewhere i have a second module that goes with, if i can find it.
Stock fuel filter mount, with inlet line and filter with only an hour or two on it.
Stainless spark arrestor air filter, stock on my 350mag, 6.5" x 1.5", fits most holley/edelbrock carbs.
Stock Merc throttle assembly
8 VDO gauges (rpm, speedo, water temp, trim angle, oil pressure, fuel level, hours and volt) all worked well
BRAVO 1 lower, rebuilt in 2008 with aprox. 50 hours since. Never hammered, no skiers, no hole shots. Comes with 2 23p props or will seperate.
BBC (maybe SBC as well?) alternator, checked out in 2009 but no need for rebuild.
BBC Comp Cam with springs, lifters and perches. 50 hours approx, no specs but one stage stronger than stock, cheap or it's scrap!
Original igloo cooler for a 202 Persuader
assortment of Earls and Automotive AN fittings and hose, brand new in boxes, mostly 6AN.
Edelbrock 750cfm marine carb, very good condition.
Stock BBC exhaust manifolds and risers
And a bazillion VW and audi parts I need gone (figged i'd try ;-)
Again, make an offer, first pay, first get. I pref. paypal but will do personal check or bank check but you'll need to wait till it fully clears.
Stock Thunderbolt ignition system that came directly off my 454 mag, includes distributor with only a few hours on new pick-up module, cap and rotor. Somewhere i have a second module that goes with, if i can find it.
Stock fuel filter mount, with inlet line and filter with only an hour or two on it.
Stainless spark arrestor air filter, stock on my 350mag, 6.5" x 1.5", fits most holley/edelbrock carbs.
Stock Merc throttle assembly
8 VDO gauges (rpm, speedo, water temp, trim angle, oil pressure, fuel level, hours and volt) all worked well
BRAVO 1 lower, rebuilt in 2008 with aprox. 50 hours since. Never hammered, no skiers, no hole shots. Comes with 2 23p props or will seperate.
BBC (maybe SBC as well?) alternator, checked out in 2009 but no need for rebuild.
BBC Comp Cam with springs, lifters and perches. 50 hours approx, no specs but one stage stronger than stock, cheap or it's scrap!
Original igloo cooler for a 202 Persuader
assortment of Earls and Automotive AN fittings and hose, brand new in boxes, mostly 6AN.
Edelbrock 750cfm marine carb, very good condition.
Stock BBC exhaust manifolds and risers
And a bazillion VW and audi parts I need gone (figged i'd try ;-)
Again, make an offer, first pay, first get. I pref. paypal but will do personal check or bank check but you'll need to wait till it fully clears.
#6
Registered
Join Date: Aug 2009
Location: lake champlain
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Thread Starter
Join Date: Sep 2008
Location: Oley Pa.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
sorry for the full inbox, didn't relalize i only a 10 message limit. Most are deleted and i'll check back here frequently. On road using a fancy phone, will forward pics and replies when i get home later tonight. And again, make offers, i have no real prices in mind.
The valve train parts are from a 454
CK, will send pic tonight,
Red, make offer
I'll Be back on later!
The valve train parts are from a 454
CK, will send pic tonight,
Red, make offer
I'll Be back on later!
#9
Registered
Join Date: Jul 2010
Location: Deerfield BCH, FL
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Join Date: May 2009
Location: Southern California
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts