Looking for inexpensive 454 replacement engine
#1
Registered
Thread Starter
Join Date: Jul 2010
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Looking for inexpensive 454 replacement engine
My formula 223 330hp 454 is tired and needs to be either replaced or rebuilt. Cash is very tight these days so I was thinking I may find a motor someone is pulling out to upgrade... Anyone have anything?
I am in California but could travel to pick up or I could have it shipped.
Thanks
I am in California but could travel to pick up or I could have it shipped.
Thanks
#2
Registered
Join Date: Aug 2009
Location: CONCORD, CALIF
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=boboznutz;3476349]My formula 223 330hp 454 is tired and needs to be either replaced or rebuilt. Cash is very tight these days so I was thinking I may find a motor someone is pulling out to upgrade... Anyone have anything?
I am in California but could travel to pick up or I could have it shipped.
I've been considering selling my 454 (started out as a 330). I'm currently building a 502. The bottom end is still stock but it's a 4 bolt block. It's got a crane hyd. cam, crane gold roller rockers, 396 (large oval) closed chamber heads w/ s.s. valves (9 to 1 compression), dart intake, holley 750dp, hvh spacer, k&n flame arrestor, etc... I'm going to keep the exhaust, valve covers, msd distributor and water crossover system + the accessories such as p/s pump, sea pump, etc... Let me know if your interested. Btw, I live in Antioch Calif.
I am in California but could travel to pick up or I could have it shipped.
I've been considering selling my 454 (started out as a 330). I'm currently building a 502. The bottom end is still stock but it's a 4 bolt block. It's got a crane hyd. cam, crane gold roller rockers, 396 (large oval) closed chamber heads w/ s.s. valves (9 to 1 compression), dart intake, holley 750dp, hvh spacer, k&n flame arrestor, etc... I'm going to keep the exhaust, valve covers, msd distributor and water crossover system + the accessories such as p/s pump, sea pump, etc... Let me know if your interested. Btw, I live in Antioch Calif.
#4
Registered
Join Date: Aug 2007
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
i have a fresh 468 still at machine shop details:
-454 4 bolt marine gen 4 bored .030 over to 468ci
-crank just trued and balanced ($400)
-rods 7/16 HD gm rods---both crank and rods are marine coated
-8.5:1 JE pistons
-square port GM heads w new manley (valves nearly $500 in valves!)
-Isky roller cam kit
-Crane Gold roller rockers
-750holley
-aftermarket oil pan
-mini hamburgers style starter
-elderbrock intake
-flywheel and balancer included
...motor is at machine shop i left it there so buyer knows it was done by professionals not by someone in their backyard!!
i sold boat w the big motor ....$3900 ....no ingition, exhuast, or front accessories
[email protected]
215-240-9725
-454 4 bolt marine gen 4 bored .030 over to 468ci
-crank just trued and balanced ($400)
-rods 7/16 HD gm rods---both crank and rods are marine coated
-8.5:1 JE pistons
-square port GM heads w new manley (valves nearly $500 in valves!)
-Isky roller cam kit
-Crane Gold roller rockers
-750holley
-aftermarket oil pan
-mini hamburgers style starter
-elderbrock intake
-flywheel and balancer included
...motor is at machine shop i left it there so buyer knows it was done by professionals not by someone in their backyard!!
i sold boat w the big motor ....$3900 ....no ingition, exhuast, or front accessories
[email protected]
215-240-9725
#5
Banned
Join Date: Mar 2010
Location: hillsboro ohio
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
454
i have 454 with well now about 9 hours of use on it, i had it built last season marine mechanic in northern kentucky for me, im wanting to upgrade boats, and plan to install a small block into this boat and sell boat
leaving this enigne on stand, its a 454 40 over my exhaust system stays, its imco power flo unless your budget would or cold afford to pay for those, but other wise you would get engine all external accc. aluminum intake, brand new 7 hours on 750 eldebrock carb. i would sell it for or between 3,000 an 3,500.
i live in ohio, so im assuming you would have to ship it, so the cost of shiping is not included in the price. i have pics, of engine, as far as all the inside stuff i dont understand all that stuff but i do have a list of what was installed in the motor, its a 2000 gen 6 454 standard rotation.
call me if interested. thanks. 937 562 1501
leaving this enigne on stand, its a 454 40 over my exhaust system stays, its imco power flo unless your budget would or cold afford to pay for those, but other wise you would get engine all external accc. aluminum intake, brand new 7 hours on 750 eldebrock carb. i would sell it for or between 3,000 an 3,500.
i live in ohio, so im assuming you would have to ship it, so the cost of shiping is not included in the price. i have pics, of engine, as far as all the inside stuff i dont understand all that stuff but i do have a list of what was installed in the motor, its a 2000 gen 6 454 standard rotation.
call me if interested. thanks. 937 562 1501
#6
Registered
Thread Starter
Join Date: Jul 2010
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
i had an engine built from a fellow on here last season and things didnt turn out so well. i ended up with a large paper weight. and the paper weight is messy leaks oil and ****, so needless to say im hunting around looking for a nice engine, either built already or one that needs assembled, or build from a block or someting, i dont know much but i know i dont want to spend my summer as i did last year trying to play catch up with the mechanic.
i havent a clue to what an acutall engine would run, i have close to 4,500 in mine and its not a quarter of yours, it makes me sick. so i ask what is someting like yours worth, am i barking and no one is listening, i listed mine for sale, i have my eye on ratboys engine, its pretty knarly but a 540 pushing 800 is even knarlier.
i havent a clue to what an acutall engine would run, i have close to 4,500 in mine and its not a quarter of yours, it makes me sick. so i ask what is someting like yours worth, am i barking and no one is listening, i listed mine for sale, i have my eye on ratboys engine, its pretty knarly but a 540 pushing 800 is even knarlier.