IMCO SCX Tie Bar
#1
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
IMCO SCX Tie Bar
This is a near perfect mirror polished super heavy duty tie bar which sells for $1300.00 new from IMCO.
I used this bar one season on a twin side by side v-hull Baja setup on SCX outdrives.
It measures 1-3/4 inch diameter x 38-1/2 inch overall length currently setup with hole centers of 36-1/2 inch. There is a little adjustment both in and out. It is bushed for 1 inch diameter pins/mounting bolts.
This is a serious heavy duty tie bar that is better than new because it is perfect for less than half the price of new.
First $450.00 Gets it plus $35.00 shipping (it is heavy!)
Sorry my camera battery died. I'll post pictures tomorrow.
Thank you
I used this bar one season on a twin side by side v-hull Baja setup on SCX outdrives.
It measures 1-3/4 inch diameter x 38-1/2 inch overall length currently setup with hole centers of 36-1/2 inch. There is a little adjustment both in and out. It is bushed for 1 inch diameter pins/mounting bolts.
This is a serious heavy duty tie bar that is better than new because it is perfect for less than half the price of new.
First $450.00 Gets it plus $35.00 shipping (it is heavy!)
Sorry my camera battery died. I'll post pictures tomorrow.
Thank you
#2
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
Picture as promised.
SCX on top and Latham underneath.
Both are very high quality units but is is very clear how much heavier the IMCO SCX bar is.
SCX on top and Latham underneath.
Both are very high quality units but is is very clear how much heavier the IMCO SCX bar is.