More parts - Steering, prop, coolers, etc
10-14-2011 | 01:53 PM
#1
Thread Starter
Platinum Member
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
More parts - Steering, prop, coolers, etc
NEW:
Charlynn Helm - NEW, for dual ram, with fittings $400
TRS Wingplate - bolted on but like new, dual plate MM style $250
Wiring Harness - New14' boat side 9pin, dash 4' extension $150
Coolers - New, Sen-Dure, large stringer mount pair $300
USED:
Mayfair Steering - Rams, transom mounts, thru-hulls $2250
WPM Ram - NEW, single ram with wingplate $1000
HighFive Prop - 25p five blade $250
Coolers - medium for trans, small for powersteering $100
Controls - single, painted purple, couple chips $150
Controls - single or single with two throttle (o/b race), black $200
Carbs - pair need overhaul $200
Oil Pan - Canton, gen iv, clean shape $250
Teague Valve Covers - need polish $125
Mallory Ignition - Unilite distributor, VI box and coil, was on a raceboat $100
Bravo gimbal for parts - torn down, freshwater unit, will part out $300
TRS Race Assembly - drivew/nosecone, BW trans, two gimbals, 25p mirage worked prop, bellhousing with exh blockoff plates, torque plate coupler, etc all in decent to really nice shape $2000 will seperate
Photobucket Link:
http://s70.photobucket.com/albums/i1...oyage/ForSale/
All prices plus shipping / make offer
Charlynn Helm - NEW, for dual ram, with fittings $400
TRS Wingplate - bolted on but like new, dual plate MM style $250
Wiring Harness - New14' boat side 9pin, dash 4' extension $150
Coolers - New, Sen-Dure, large stringer mount pair $300
USED:
Mayfair Steering - Rams, transom mounts, thru-hulls $2250
WPM Ram - NEW, single ram with wingplate $1000
HighFive Prop - 25p five blade $250
Coolers - medium for trans, small for powersteering $100
Controls - single, painted purple, couple chips $150
Controls - single or single with two throttle (o/b race), black $200
Carbs - pair need overhaul $200
Oil Pan - Canton, gen iv, clean shape $250
Teague Valve Covers - need polish $125
Mallory Ignition - Unilite distributor, VI box and coil, was on a raceboat $100
Bravo gimbal for parts - torn down, freshwater unit, will part out $300
TRS Race Assembly - drivew/nosecone, BW trans, two gimbals, 25p mirage worked prop, bellhousing with exh blockoff plates, torque plate coupler, etc all in decent to really nice shape $2000 will seperate
Photobucket Link:
http://s70.photobucket.com/albums/i1...oyage/ForSale/
All prices plus shipping / make offer
Last edited by fantastixvoyage; 10-14-2011 at 03:01 PM.
10-17-2011 | 06:28 AM
#3
Registered
Joined: Aug 2008
Posts: 1,215
Likes: 10
From: Osage beach
10-24-2011 | 09:51 AM
#4
Thread Starter
Platinum Member
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
Sorry for the delay, here are some specs on the carbs when I looked up "9381"
http://www.summitracing.com/parts/HLY-0-9381 $465 each, need to be rebuilt but dirt cheap at $200.
http://www.summitracing.com/parts/HLY-0-9381 $465 each, need to be rebuilt but dirt cheap at $200.
10-31-2011 | 03:59 PM
#8
Thread Starter
Platinum Member
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
Carbs and valve covers are tentatively sold to the first person. If they become available again, I'll go in the order posts & PMs were made.
I will be adding more parts/pics to the photobucket account this week
I will be adding more parts/pics to the photobucket account this week
Last edited by fantastixvoyage; 10-31-2011 at 04:02 PM.
11-18-2011 | 11:29 AM
#10
Thread Starter
Platinum Member
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
Updated list with sold items removed, more parts to be added this weekend
NEW:
TRS Wingplate - bolted on but like new, dual plate MM style $250
Wiring Harness - New14' boat side 9pin, dash 4' extension $150
Coolers - New, Sen-Dure, large stringer mount pair $300
USED:
HighFive Prop - 25p five blade $250
Coolers - medium for trans, small for powersteering $100
Controls - single, painted purple, couple chips $150
Controls - single or single with two throttle (o/b race), black $200
Oil Pan - Canton, gen iv, clean shape $250
Mallory Ignition - Unilite distributor, VI box and coil, was on a raceboat $100
Bravo gimbal for parts - torn down, freshwater unit, will part out $300
TRS Race Assembly - drivew/nosecone, BW trans, two gimbals, 25p mirage worked prop, bellhousing with exh blockoff plates, torque plate coupler, etc all in decent to really nice shape $2000 will seperate
Photobucket Link:
http://s70.photobucket.com/albums/i1...oyage/ForSale/
All prices plus shipping / make offer
NEW:
TRS Wingplate - bolted on but like new, dual plate MM style $250
Wiring Harness - New14' boat side 9pin, dash 4' extension $150
Coolers - New, Sen-Dure, large stringer mount pair $300
USED:
HighFive Prop - 25p five blade $250
Coolers - medium for trans, small for powersteering $100
Controls - single, painted purple, couple chips $150
Controls - single or single with two throttle (o/b race), black $200
Oil Pan - Canton, gen iv, clean shape $250
Mallory Ignition - Unilite distributor, VI box and coil, was on a raceboat $100
Bravo gimbal for parts - torn down, freshwater unit, will part out $300
TRS Race Assembly - drivew/nosecone, BW trans, two gimbals, 25p mirage worked prop, bellhousing with exh blockoff plates, torque plate coupler, etc all in decent to really nice shape $2000 will seperate
Photobucket Link:
http://s70.photobucket.com/albums/i1...oyage/ForSale/
All prices plus shipping / make offer
