Post Swap Meet Blow Out!
 

540 Crower Rods and Pistons - 1000
9.8/1 Comp. ratio 200 hours
2 1 wire Alts - 50 Each
racing Batt Box - 100
Blowers - 2 for 30
Boost Gauge - 60
Fender Hooks - 10
Bravo Drive Shaft Set Up - 200
BW 72C trannys - 2 TRS Input 500
BW 72C 2 - SSM Tail Stock 550 need rebuilds
Oil Cooler 3- 75 each
P/S Cooler 2- 50 each
Distributor 2- 50 each Accel coils
454 Long Block - 2000 Gen IV 55 hours
Roller Rocks, Rect. port heads, Holley Carb, Uni Lite Dist
Mild Cam, Cross Over, Water Outlet, Remote Oil Filter
With Imco PowerFlows 3000K
454 Short Block- 700 edlebrock fuel pump
60 Over, 9.5/1, short deck gen IV Hours?
Can Put on: 10 qts Pan + 75
781 Oval Port Heads + 200
Intake- 100
Roller Rockers Crane Energizer- 150
1 Piece Push Rods- Free with Rockers
Fender Holders - 125 for all 3
Fuel Filter Heads - 25 each
Fuel 1 way valves - 10 each
Fuel Pump Electric - 4 25 each
halon 3 - 40 each
Wirine Harness - 50
Gen 5 Heads 088's- 150
Needs a valve and freshing
BBC Mech Fuel Pump New - 25
Mirage Plus 27 Prop - 250
motorola4 wire alt - 50
Engine Mounts - 100 pair
Alpha Lower Spins OK Case decent - 100
Top Mounts Starters 3 - 50 each
MSD 7AL - 200
Mufflers 2 sets Air Acuated 1 needs cylinder - 100 a set
Perko with wiring - 60
MSD Prop Billet Slip Collar Dist New - 180
PS Pump 2 - 50 each
Trim Ram Bravo hoses and Drive adaptor block - 25
Remote Oil Set Up - 40
SBC 1 Piece manley push rods - 50
Air Scoops 2 - 50 each
Sea Water Pump 2 - 50 each
Shifters - 200
Throttles - 200
I can make 2 singles if some one wants it that way
Trim Pumps 6 - 120 each
TRS Bell housing 2 - 50 each
TRS Gimbal 3 - 400
2 have been rebuilt other is tight and in nice shape.
Bravo Water inlet- 5
Water Pick Up - 50
Fuel Y Valve 2 - 15 each
Gil Batt Boxes 2 - 25 each
TRS Drives 3 - L 1300 R 1300
1 L and R were resealsed new cardan joints new u joints
clean drives 425 boat
1 R with Mach 22 prop needs cardan joint have staggared
Input shaft for it 500 for all (input shaft, drive, prop)
Bravo Shift Bracket - 25
10 qts GevIV Cast Aluminum Base Pan 2 - 100 each
- These are notched for strokers
- 1 has windage tray other needs one
Misc white gauges- HourMeter, High Pressure Fuel Tach
B/O
454 Bare Block- 100
Imco Power Flow Exhaust wet 2 sets - 1300 each

Everything does not include shipping. Engines I will deliever with in reason just let me know.
Thanks
-Mike

More Pics
Also Crane Gold energizer roller rockers 150 with push rods
And a Gen IV 454 Low Hours 450 HP Long block roller rockers 781 heads edlebock intake 2000 with imco powerflow exhaust 3000

More pics

Keep'em coming

Here are more for you

half way there

More still to come

Finishing up almost

Email is [email protected] if you need anything or more pics.
-Mike

If PM is easier go for it. Ill try to keep the box clean
-Mike

Parts for Sale
 

PM sent on BW transmissions.
Thanks.

Replied
Thankyou

Cafe race grab rail for engine hatch I'm green- 75

I'm also looking to trade if any one needs/has what I need:
Looking for the following:
Trim indicaters drives tabs and dash panel
Prop sets 26 25 24
-Mike

What size are the fender holders in post #3. If they are the right size I will take them provided price is fair. What is Price.
RG.

What intake do you have? How much for crossover and tstat housing

Rick 9 inches in diameter
Arte I wasn't going to pull the engine apart but they are 330 new give me 250 all yours

He has 1 square and 2 oval port intakes which one are you looking for?

Oval port or they square or spread bore

I have 2 wiend stealth ovals in merc racing blue
-Mike

Pics sent thanks guys

Does that have a air gap? Is it square or spread bore? Is it dual plain

How much?

125 for 1 both I'll do 225
Thanks
-Mike

Whats in the mark 4 454 for internals and is it a 4 bolt main?

PM sent
Thanks
-Mike

Couple more items around the shop for you guys
Bracket for mallory reg 15 bolt spread for a dom carb
reg 65 ill included the bracket free
-Mike

Hey Mike, is the Alpha lower standard or counter rotation? Let me know.....thanks, Brad.

It's a standard I would guess. I thought the alpha was set up like a bravo in that they were brainless and just shift position determined the rotation and not a set spin direction like a Ted.
-Mike

Nope they are like TRS and you need a counter. I wonder if they are like the TRS and stamped L and R?

It came off a single engine RH proped tinker sbc 1.5

Mirage 27 and bravo shift bracket to 65065?

300 to your door spider

I did not see a picture of the 10 qt oil pans, do they have the bolt hole in the front for the alt. bracket?

Who’s shifters do they have trim switch

43 yes gol incthe front for a stud. I thought the pics were up I will post or send if you wish thankyou
The throttled shifters race livorsis no trim in handle

I was hoping it was a LH...might still pick it up for a spare on the starboard drive. How much shipped to 42101?....thanks, Brad.

150 to your door
Thanks

You can send me picture of the oil pan, thanks.
[email protected]